Abstract:Brick-concrete buildings have been extensively used in urban and rural areas.However,this type of building,which frequently contains a shallow foundation,demonstrates poor struc-tural integrity and is susceptible to influence from ambient vibrations.This case is especially validfor buildings that were constructed in previous eras.With the development of modern cities andthe increasing demand for an enhanced quality of life,environmental interference caused by ambi-ent vibrations has become a critical issue.In areas with soft soil,traffic is a primary source ofambient vibrations.Vehicle vibrations caused by road surface roughness or speed changes cancause vibrations throughout the foundation of a building.Therefore,the vibration of brick-con-crete buildings is related not only to the excitation source of the vibration but also the soil charac-teristics,the foundation conditions,and the structural style.The human response to the vibra-tions of housing structures is closely correlated with a person's cognitive level and their currentphysical and psychological conditions.Thus,the potential difference in the reactions amongbuilding occupants is significant.Residents in a six-story brick-concrete building,which is located in an area of Shanghai withsoft ground,frequently complained about the intermittent interference from vibrations,particularly residents on the upper two stories.The measures confirmed that the environmental vibra-tions were generated by heavy vehicles traveling on a road that was located approximately 80 mnorth of the building.The frequency and amplitude characteristics of the ambient vibrations andthe human comfort levels for the different stories of the building were analyzed according to the"standard for allowable vibration of building engineering"(GB50868-2013).To comprehensivelyevaluate the impact induced by the transversely horizontal vibrations,which influences humancomfort levels for the three components of building vibration,a numerical finite element model(FEM)of the building was developed and analyzed.The soil in the model was simulated as a vir-tual layer.According to the test results and the numerical analyses,two types of technical measures areproposed to reduce unfavorable vibrations.The paper yields the following conclusions:(1)The test results show that heavy-duty vehicles from nearby roads are the main cause ofthe building vibrations.The vertical component of the vibrations along the structure is almostconstant;however,its lateral component is significantly amplified,which primarily influenceshuman comfort.(2)The measures indicate that the peak acceleration range for the top two stories is 68~70dB,which is lower than the limit values proposed by the"standard for allowable vibration ofbuilding engineering"(GB50868-2013).The rationality of the limit values is discussed to satisfythe demand of human comfort.(3)The structural frequencies and modes are analyzed based on the assumption of a virtuallayer of foundation;the simulated results correspond with the measures.The model is a reasona-ble tool for justifying the effect of vibration reduction measures.(4)To ensure that each story of the multi-story brick-concrete building complies with thepreviously recommended standard,the peak lateral acceleration should be reduced by approxi-mately 21% and the two proposed technical measures,which are compared,should be applied.

Tower building on resilient mountings

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

A novel damped braced tube system for tall buildings in high seismic zones

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building

Bi-directional wind-induced vibration control of high-rise buildings using bi-directional rail variable friction pendulum-tuned mass damper

Structural Health Monitoring of a Tall Building with Huge Floating Platform

Real-world installations of tuned liquid column dampers for wind-induced vibration control of tall buildings

Performance-Based Compositive Passive Control Analysis of Multi-Tower Building with Chassis: Optimization of Kelvin-Voigt Dampers

Manhattan Loft Gardens, London: balancing design and constructability

Enhancing the earthquake resistance of RC and steel high-rise buildings by bracings, shear walls and TMDs considering SSI

Ambient Vibration Testing of a Super Tall Building in Shanghai

Ambient Vibration Test for a Multi-story Residential Building and the Vibration Mitigation Measures

Assessment of wind-induced vibration mitigation in a tall building with damped outriggers using real-time hybrid simulations

Soft touch temporary works: Westminster Hall roof lantern freestanding access, UK

Comfort assessment of high‐rise timber buildings exposed to wind‐induced vibrations

Effect of Variation in Shapes of High Rise Structures on Resistance against Seismic Loads

Dynamical Shakedown Analysis of High-Rise Tower Structure

Analysis, Design, and Construction of a Base-Isolated Multiple Building Structure

Wind Induced Hanger Vibrations – the Hålogaland Suspension Bridge

Long-Term Efficient Control of Structure-Borne Noise Inside Buildings Caused by Underground Railways by Using Novel Damping Fasteners