Abstract:This study examines the ability of damping devices placed between outrigger trusses and perimeter columns to mitigate dynamic vibrations in a tall building structure. The implementation of this approach to mitigate wind-induced vibrations for a 40-story building is assessed via a series of real-time hybrid simulations (RTHS), in which a numerical model of the complete building actively interfaces with physical dampers in the laboratory via actuators. In a RTHS, the overall structure is divided into analytical and experimental substructures, where the latter is challenging to model numerically and therefore evaluated in the laboratory as the experimental substructure. The experimental substructure for the RTHS in this study includes two full-scale nonlinear viscous dampers, and the rest of the building is modelled numerically as the analytical substructure. The coupling between the experimental and the analytical substructures is achieved in real time by enforcing compatibility and equilibrium between the two substructures during a simulation. Results of the RTHS show the feasibility of reducing the root mean square (RMS) and maximum wind-induced roof accelerations by up to 43% and 37%, respectively, when the building is subjected to a 700-year mean recurrence interval (MRI) storm with a 177 km/h basic wind speed. The stiffness of the members in the damper force path and the number of dampers play a major rule in controlling the wind induced vibrations. The results show that the as-built outrigger truss and column members require additional stiffening in order to maximize the benefit of adding the dampers to the building. There is a limit to the number of dampers that can be used beyond which minimal benefit is gained towards improving the performance of the building. RTHS are also used to estimate the equivalent viscous damping of the building with the outrigger damping system, which is found to be 8.7% of critical damping for the 1st mode of vibration.

A novel damped braced tube system for tall buildings in high seismic zones

Seismic performance of a damping outrigger system for tall buildings

Tuned Viscous Mass Damper (TVMD) Coupled Wall System for Enhancing Seismic Performance of High-Rise Buildings

Seismic Response Control of Core Wall Structures Using Tuned Viscous Mass Damper (TVMD) Outriggers

Application of amplified damped outrigger in seismic design of high‐rise buildings

Development of a Novel Sacrificial‐energy Dissipation Outrigger System for Tall Buildings

Seismic Response of a Tuned Viscous Mass Damper (TVMD) Coupled Wall System

Integrated damping systems for tall buildings: tuned mass damper/double skin facade damping interaction system

Analysis of Tall Buildings with Damped Outriggers

Multiperformance optimization design of a hybrid vibration mitigation system for super high‐rise buildings to improve earthquake resistance

Control effect of large tuned mass damper used for seismic retrofitting of existing high‐rise building

Assessment of wind-induced vibration mitigation in a tall building with damped outriggers using real-time hybrid simulations

Optimal parameters for tall buildings with a single viscously damped outrigger considering earthquake and wind loads

Damping Identification of a Full‐scale Passively Controlled Five‐story Steel Building Structure

Seismic control of super high‐rise structures with double‐layer tuned particle damper

Optimal application of fluid viscous dampers in tall buildings incorporating integrated damping systems

Study on a novel sacrificial-energy dissipation outrigger

Structural Design of Office Building with Resilience and Redundancy using Viscoelastic Dampers

Optimal design of supplemental negative stiffness damped outrigger system for high-rise buildings resisting multi-hazard of winds and earthquakes

Suppression of the torsional irregularity of high-rise buildings using viscous wall dampers

Frequency independent damped outrigger systems for multi‐mode seismic control of supper tall buildings with frequency independent negative stiffness enhancement