Seismic performance of shear energy dissipation beams in D-shaped eccentrically braced steel frames
Jixiang Xu,Shuai Lin Wang,Hazem Samih Mohamed,Jianping Han,Zhaolong Han,Jiahuang Tu,Zhanjie Li
DOI: https://doi.org/10.1016/j.jcsr.2021.106584
IF: 4.349
2021-05-01
Journal of Constructional Steel Research
Abstract:<p>Unlike other eccentrically braced steel frames (EBF) such as Y/K-shaped EBFs, D-shaped EBF has asymmetry, and the failure mechanism of D-shaped EBF is quite different compared to Y/K-shaped EBFs under earthquake load. In view of this, the paper focuses on the seismic performance of the shear energy dissipation beams (SEDB) in EBF. A full-scale computation model of a single-span EBF with a short SEDB was numerically simulated. The results of the existing experiment were employed to verify the validity and accuracy of the proposed computation model. Meanwhile, numerous parametric studies were conducted. The cross-section height, flange width, web thickness, flange thickness and the number of stiffeners (spacing) of the SEDB were selected as the research parameters. By analyzing hysteretic curve, stiffness degradation, ductility and energy dissipation capacity of the SEDB in EBFs, the performance of such structure was investigated. The parametric study indicates that changing the cross-section height of the SEDB had a significant impact on its ultimate bearing capacity, stiffness degradation, ductility and energy dissipation capacity. On the contrary, the flange width of SEDB had a minor effect on the hysteretic performance of the structure. It is also observed that, if the SEDB 's web thickness was increased within an acceptable range, the bearing capacity, rigidity and energy dissipation ability may be strengthened. However, the too thick web caused a reduction in the structure ductility. On the other side, when the SEDB's flange thickness was increased, the bearing capacity, rigidity and energy dissipating capacity of the SEDB were slightly increased, but the ductility of the structure was greatly affected. It is also noted that a reasonable spacing of stiffeners improved the load-bearing capacity and stiffness of the structure. Based on the results from the study, a necessary recommendations for height to thickness ratio of the web and width to thickness ratio of flange are provided for the design of the SEDB in EBF.</p>
construction & building technology,engineering, civil