Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Optimized viscous dampers mitigate the dynamic response of building with plan asymmetry. Previous research efforts limit the optimization method to time domain requiring time history analyses to optimize damper placement for plan eccentricity-induced torsional response combined with translational response. This can consume high computational effort and lead to the variability in the ground motion selection. To expedite the optimization process while taking ground motion variability into account, this study will offer a novel criterion based on stochastic performance. This technique will skip the traditional approach of employing time history analyses and will take frequency domain variability into account. Through given distance between the center of mass (CM) and the target frame, the study establishes the stochastic criterion for the response at the perimeter of the building where the maximum torsional-translational response occurs. This allows the optimization methods to generate high quality solution with less computational efforts compared to traditional approach (i.e. time domain-based optimization). It is noteworthy that the proposed criterion is applicable to extensive kinds of responses (e.g. peak floor acceleration, story shear and etc.) once the geometric relationship is given. The proposed criterion as the objective function is compared against their counterpart in time domain through a case study. The case study is based on a reinforced concrete (RC) moment-resisting-frame (MRF) building with two-way asymmetric plan and adopts Element Exchange Method (EEM) to optimize the damper placement. The effectiveness of optimized design based in frequency domain and time domain is evaluated for their total running time and maximum peak interstory drift against a suite of ground motions. The result showed that the proposed criterion can offer the improvement against the traditional approach in terms of solution quality (i.e. performance in time domain and frequency domain) and computational efforts (i.e. total running time for optimization).

Performance-Based Compositive Passive Control Analysis of Multi-Tower Building with Chassis: Optimization of Kelvin-Voigt Dampers

Seismic Response Mitigation of Adjacent High-Rise Structures Via Stochastic Optimal Coupling-Control

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Multi-objective optimization and seismic performance verification of multiple tuned impact dampers for nonlinear benchmark building

Semi-Active Control of Randomly Wind-Excited Tall Building Structures Using Mr-Tlcds

Multi-Performance Economical Optimization of Base Isolation System with Tuned Inerter Negative Stiffness Damper Subjected to Non-Stationary Seismic Excitation

Feedback Control Optimization for Seismically Excited Buildings

Optimal control for vibration peak reduction via minimizing large responses

An innovative pendulum-type column-in-column (PCIC) system for structural vibration control induced by seismic ground excitations

Seismic response control of tall building using semi-active tuned mass damper considering soil-structure interaction

Optimizing Viscous Damper Placement for Stochastic Performance of Buildings with Plan Asymmetry

Seismic response control of adjacent buildings coupled by semi-active shared TMD

Integrated Structural Optimization and Vibration Control for Improving Wind-induced Dynamic Performance of Tall Buildings

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Parameter optimization of vibration control system for adjacent building structures based on negative stiffness inerter damper

Parametrized multi-objective seismic optimization for precast concrete frame with a novel post-tensioned energy dissipation beam-column joint

Real-Time Hybrid Simulation of Full-Scale Tuned Liquid Column Dampers to Control Multi-Order Modal Responses of Structures

Multiperformance optimization design of a hybrid vibration mitigation system for super high‐rise buildings to improve earthquake resistance

Seismic Response Analysis of Composite Isolation Structures with Non-Classical Damping

Multi-objective optimal design of Tuned Mass Damper Inerter for base isolated structures

Comprehensive Assessment of the Seismic Performance of an Innovative Hybrid Semiactive and Passive State Control System for a Low-Degree-of-Freedom Structure Using Real-Time Hybrid Simulation