Abstract:Current research in the field of aviation considers actively controlled high-lift structures for future civil airplanes. Therefore, pressure data must be acquired from the airfoil surface without influencing the flow due to sensor application. For experiments in the wind and water tunnel, as well as for the actual application, the requirements for the quality of the airfoil surface are demanding. Consequently, a new class of sensors is required, which can be flush-integrated into the airfoil surface, may be used under wet conditions-even under water-and should withstand the harsh environment of a high-lift scenario. A new miniature silicon on insulator (SOI)-based MEMS pressure sensor, which allows integration into airfoils in a flip-chip configuration, is presented. An internal, highly doped silicon wiring with "butterfly" geometry combined with through glass via (TGV) technology enables a watertight and application-suitable chip-scale-package (CSP). The chips were produced by reliable batch microfabrication including femtosecond laser processes at the wafer-level. Sensor characterization demonstrates a high resolution of 38 mVV-1 bar-1. The stepless ultra-smooth and electrically passivated sensor surface can be coated with thin surface protection layers to further enhance robustness against harsh environments. Accordingly, protective coatings of amorphous hydrogenated silicon nitride (a-SiN:H) and amorphous hydrogenated silicon carbide (a-SiC:H) were investigated in experiments simulating environments with high-velocity impacting particles. Topographic damage quantification demonstrates the superior robustness of a-SiC:H coatings and validates their applicability to future sensors.

Low Maintenance MEMS Packaging for Rotor Blade Integration

Development of a wireless, non-intrusive, MEMS-based pressure and acoustic measurement system for large-scale operating wind turbine blades

Hermetic and Bioresorbable Packaging Materials for MEMS Implantable Pressure Sensors: A Review

Design and Fabrication of a MEMS Temperature and Pressure Integrated Sensor with Back-Inlet Package Structure

Fabrication and wafer-level vacuum packaging of MEMS resonant pressure sensor

Low stress packaging of a micromachined accelerometer

New Low-Cost MEMS Capacitive Pressure Sensor Concept

A Multipurpose Optical MEMS Sensor for Harsh Environments

Design of a Tri-Axial Surface Micromachined MEMS Vibrating Gyroscope

An Optoelectronic System For The In-Flight Measurement Of Helicopter Rotor Blades Motions And Strains

MEMS vacuum packaging technology and applications

Removable Fast Package Technology For Mems Devices Using Polymer Connectors And Silicon Sockets

Robust Pressure Sensor in SOI Technology with Butterfly Wiring for Airfoil Integration

Chip-levelVacuum Package and Test of Resonant MEMS Electric Field Sensor

Hybrid Packaging of A Monolithic Multi-Sensor

An Investigation On Neg Thick Film For Vacuum Packaging Of Mems

Airfoil Anemometer With Integrated Flexible Piezo-Capacitive Pressure Sensor

Encapsulation of the next generation advanced mems& sensor microsystems

High Vacuum Packaging of MEMS Devices Containing Heterogeneous Discrete Components

What MEMS Research and Development Can Learn from a Production Environment

A Novel Piezoresitive Microphone MEMS Sensor For Aerospace Applications