Abstract:The solidification control is of extreme importance, because it strongly affects the final casting quality sanity. The structure obtained is generally not homogeneous and gives rise to great variations in composition, with position at small and large scales, which is known as segregation. An understanding of the way segregation occurs in continuous casting is of great importance for steels and in designing post-casting processes. As-cast structures are responsible the reduction in both scale and extension of segregation, because mass transport is dependent on the time required to diffuse a solute over a characteristic distance, e.g., the dendrite spacing that the characterizes the solidification structure. In this work, the effect of pouring temperature in steel slabs on the continuous casting processes are systematically investigated. Relationships between pouring temperature (PT) and center macrosegregation was qualitatively examined. Photomicrographs of specimen taken from transverse sections of steel slabs, shows that macrosegregation is strongly affected by pouring temperature (PT). For solute of carbon, phosphorus and sulfur, has been shown that the pouring temperature (PT) has a significant role on the resulting macrosegregation profiles, while that the elements as such silicon, manganese and aluminum, the said thermal parameter seems not able to affect its macrosegregation profiles. This is due to the fact that the solutes with lower partition coefficients favors segregation during the continuous casting process. It is shown for considered steels, the pouring temperature (PT) influences the position of the columnar to equiaxed transition (CET). Experimental results show that the end of the columnar region is abbreviated when lower pouring temperatures is used in continuous casting process. One can observe that as the pouring temperature (PT) increase in continuous casting process, the secondary dendritic arm spacing (λ2) increase, i.e., the dendritic morphology became coarsen.

Investigation of Continuous Casting of Steel Slabs

Simulation Using Realistic Spray Cooling for the Continuous Casting of Multi—component Steel

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Analysis of the Depth of Immersion of the Submerged Entry Nozzle on the Oscillations of the Meniscus in a Continuous Casting Mold

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

An Experimental Investigation of Continuous Casting Process: Effect of Pouring Temperatures on the Macrosegregation and Macrostructure in Steel Slab

Analysis of Thermo-fluidic and Phase Change Behaviour of Liquid Steel in a Continuous Billet Caster Mould: Effect of Casting Speed

In situ observation and investigation of effect of cooling rate on slab surface microstructure evolution in microalloyed steel

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Real-time surface temperature measurement of steel continuous casting strand in the steam-filled spray chamber

Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation

Continuous Casting Tundish Dead Volume Study by Physical Modeling and Computational Investigation

Numerical Simulation of Steel Flow Through a One Strand Slab Tundish with Steel Flow Control Devices

Numerical Modeling of Transient Flow Characteristics on the Top Surface of a Steel Slab Continuous Casting Strand Using a Large Eddy Simulation Combined with Volume of Fluid Model

Analysis of Longitudinal Cracking and Mold Flux Optimization in High-Speed Continuous Casting of Hyper-Peritectic Steel Thin Slabs

Diffusive steel scrap melting in carbon-saturated hot metal—phenomenological investigation at the solid–liquid interface

Flow and Heat Transfer on the Surface of Molten Steel Slag Layer in Continuous Casting Mold

Simulation of Subrapid Solidification and Secondary Cooling for the Strip Casting of IF Steel

Application of Graphite Electrode Plasma Heating Technology in Continuous Casting

Continuous casting simulation of 2304 duplex stainless steel via horizontal directional solidification technique