Abstract:The solidification control is of extreme importance, because it strongly affects the final casting quality sanity. The structure obtained is generally not homogeneous and gives rise to great variations in composition, with position at small and large scales, which is known as segregation. An understanding of the way segregation occurs in continuous casting is of great importance for steels and in designing post-casting processes. As-cast structures are responsible the reduction in both scale and extension of segregation, because mass transport is dependent on the time required to diffuse a solute over a characteristic distance, e.g., the dendrite spacing that the characterizes the solidification structure. In this work, the effect of pouring temperature in steel slabs on the continuous casting processes are systematically investigated. Relationships between pouring temperature (PT) and center macrosegregation was qualitatively examined. Photomicrographs of specimen taken from transverse sections of steel slabs, shows that macrosegregation is strongly affected by pouring temperature (PT). For solute of carbon, phosphorus and sulfur, has been shown that the pouring temperature (PT) has a significant role on the resulting macrosegregation profiles, while that the elements as such silicon, manganese and aluminum, the said thermal parameter seems not able to affect its macrosegregation profiles. This is due to the fact that the solutes with lower partition coefficients favors segregation during the continuous casting process. It is shown for considered steels, the pouring temperature (PT) influences the position of the columnar to equiaxed transition (CET). Experimental results show that the end of the columnar region is abbreviated when lower pouring temperatures is used in continuous casting process. One can observe that as the pouring temperature (PT) increase in continuous casting process, the secondary dendritic arm spacing (λ2) increase, i.e., the dendritic morphology became coarsen.

Continuous casting simulation of 2304 duplex stainless steel via horizontal directional solidification technique

Experimental simulation on the continuous casting solidified structure of S32205 duplex stainless steel

In Situ Observation and Phase-Field Simulation Framework of Duplex Stainless-Steel Slab during Solidification

Effect of stirring on the solidification structure and segregation of 60Si2MnA spring steel during continuous casting

Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation

Simulation and Study of Influencing Factors on the Solidification Microstructure of Hazelett Continuous Casting Slabs Using CAFE Model

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Influences of superheat and cooling intensity on macrostructure and macrosegregation of duplex stainless steel studied by thermal simulation

An Experimental Investigation of Continuous Casting Process: Effect of Pouring Temperatures on the Macrosegregation and Macrostructure in Steel Slab

Modelling of Solidification Structure and Macro-Segregation in an Industrial DC Cast Slab

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Numerical Simulation of Solute Transport Behavior During the Grade Transition of Round Billet Continuous Casting

Heat transfer behavior and formation mechanism of stainless steel cladding carbon steel plate during horizontal continuous liquid-solid composite casting

Fluid Flow, Solidification and Solute Transport in Slab Continuous Casting with Different S-EMS Installation Positions

Transient Modeling Of Grain Structure And Macrosegregation During Direct Chill Casting Of Al-Cu Alloy

Simulation of Subrapid Solidification and Secondary Cooling for the Strip Casting of IF Steel

Design Improvement of Four-Strand Continuous-Casting Tundish Using Physical and Numerical Simulation

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Study on Direct Chill Continuous Casting of 3003/4004 Clad Slab

Mechanism of δ → δ + γ phase transformation and hardening behavior of duplex stainless steel via sub-rapid solidification process