Abstract:The solidification control is of extreme importance, because it strongly affects the final casting quality sanity. The structure obtained is generally not homogeneous and gives rise to great variations in composition, with position at small and large scales, which is known as segregation. An understanding of the way segregation occurs in continuous casting is of great importance for steels and in designing post-casting processes. As-cast structures are responsible the reduction in both scale and extension of segregation, because mass transport is dependent on the time required to diffuse a solute over a characteristic distance, e.g., the dendrite spacing that the characterizes the solidification structure. In this work, the effect of pouring temperature in steel slabs on the continuous casting processes are systematically investigated. Relationships between pouring temperature (PT) and center macrosegregation was qualitatively examined. Photomicrographs of specimen taken from transverse sections of steel slabs, shows that macrosegregation is strongly affected by pouring temperature (PT). For solute of carbon, phosphorus and sulfur, has been shown that the pouring temperature (PT) has a significant role on the resulting macrosegregation profiles, while that the elements as such silicon, manganese and aluminum, the said thermal parameter seems not able to affect its macrosegregation profiles. This is due to the fact that the solutes with lower partition coefficients favors segregation during the continuous casting process. It is shown for considered steels, the pouring temperature (PT) influences the position of the columnar to equiaxed transition (CET). Experimental results show that the end of the columnar region is abbreviated when lower pouring temperatures is used in continuous casting process. One can observe that as the pouring temperature (PT) increase in continuous casting process, the secondary dendritic arm spacing (λ2) increase, i.e., the dendritic morphology became coarsen.

Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical Simulation of Microstructure Evolution of Heavy Steel Casting in Casting and Heat Treatment Processes

Numerical simulation of continuous casting process of different steel grades considering solidification and mixing of different steel grades

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Simulation and Experimental Study of Fluid Flow and Solidification Behavior in Thin Slabs Continuous Casting Process under Secondary Electromagnetic Stirring

Numerical simulation on solidification microstructure of cast steel using cellular automaton method

Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification

Study on solidification and heat transfer of billet shell in a new-structure high-speed continuous casting mold

Analysis of Thermo-fluidic and Phase Change Behaviour of Liquid Steel in a Continuous Billet Caster Mould: Effect of Casting Speed

The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

Experimental simulation on the continuous casting solidified structure of S32205 duplex stainless steel

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Heat-transfer and solidification model of continuous slab casting: CON1D

Initial Solidification Behavior of Spring Steel Billet Near the Mold Corner During Continuous Casting Process

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Continuous casting simulation of 2304 duplex stainless steel via horizontal directional solidification technique

An Experimental Investigation of Continuous Casting Process: Effect of Pouring Temperatures on the Macrosegregation and Macrostructure in Steel Slab

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction