Abstract:This paper presents a numerical simulation of the steel grade transition from the ladle nozzle to the solidification end of the bloom. The simulation is based on models encompassing fluid flow, solidification, heat transfer, an electromagnetic field, and solute transport. To validate the accuracy of the steel grade transition model, transition blooms of high-carbon steel are sampled. Subsequently, the model is applied to investigating the steel grade transition between medium-carbon steel and low-carbon steel. The findings indicate that the regions exhibiting significant differences between their molten steel flow velocity and bloom casting speed in the strand model are primarily concentrated within 1 m below the meniscus. Additionally, the mushy zone in the strand model possesses a substantial volume. Solute elements continuously permeate the liquid phase from the solid phase through the mushy zone. Consequently, the distribution of solute elements in the transition bloom is primarily influenced by the molten steel flow in the tundish and macro-segregation in the casting process. The segregation degree of each solute element varies among grades with different carbon contents. In the austenite phase, the segregation degree of each element follows the order C > Si > Mo > Mn > Cr > Ni, while in the ferrite phase, the segregation degree is ordered as C > Si = Mn. Considering macro-segregation, the transition bloom partition model proves to be more stringent than the original partition method. This results in longer transition blooms when a significant difference exists between the new and old grades. For example, in Scheme 1, the original plan transition bloom length is 8.88 m, whereas the new plan transition bloom length is 10.88 m. Similarly, in Scheme 2, the original plan transition bloom length is 34.64 m, and the new plan transition bloom length is 35.16 m. Conversely, shorter partition intervals occur when there is an overlap in the composition of the new and old grades. In Scheme 3, the original plan partition interval for the new and old grades is 4.08 m, while the new plan partition interval is reduced to 0.94 m.

Numerical Simulation of Solute Transport Behavior During the Grade Transition of Round Billet Continuous Casting

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

The Effect of Steel Grade Casting Sequence on the Length of Transition Bloom

Numerical simulation of continuous casting process of different steel grades considering solidification and mixing of different steel grades

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Numerical modeling of grade mixing and inclusion entrapment in eight strand billet tundish

Control of macrosegregation at the steel gradient transition by submerged entry nozzle and mold electromagnetic stirring

Numerical Simulation of Macro-Segregation Phenomena in Transition Blooms with Various Carbon Contents

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Homogenization Path Based on 250 mm × 280 mm Bloom under Mixed Light and Heavy Presses: Simulation and Industrial Studies

Numerical Simulation of Centerline Segregation in Continuous Casting Billet

Numerical simulation of shrinkage porosity defect in billet continuous casting

Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification

Numerical Simulation on Multiple Physical Fields Behaviors in Billet Continuous Casting with Different Stirrer Positions

Numerical simulation on the centre macrosegregation during Billet continuous casting with the soft reduction

On the Macrosegregation of Continuous Casting of High Carbon Steel Billet with Strand Reduction Process

Numerical Simulation of Mold Slag Entrapment Behavior in Nonoriented Silicon Steel Production Process

Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation

High-efficiency continuous casting of GCr15 bearing steel bloom based on cooperative control technique of complex electromagnetic stirring and soft reduction

Analysis of Thermo-fluidic and Phase Change Behaviour of Liquid Steel in a Continuous Billet Caster Mould: Effect of Casting Speed

Centerline Segregation in Continuous Casting Billets