Abstract:Ternary Mn-Co-Fe metallic thin films were deposited by RF-magnetron co-sputtering on SiO2/Si wafers and on ZMG232L (Hitachi Metals®), a special ferritic stainless steel for Solid Oxide Fuel Cell applications. The deposition was followed by heat treatment in an oxidizing atmosphere in order to convert the metallic thin films to (Mn,Co,Fe)3O4 spinel oxides. Coated and uncoated steel samples were analyzed after 1 h heat treatment in order to confirm the presence of the spinel structure on top of the steel, as well as to investigate and characterize the growth of oxides, namely (Mn,Cr)3O4 and Cr2O3, at the internal steel/coating interface. From Grazing Incidence X-ray Diffraction (GI-XRD) investigations together with Energy Dispersive X-ray analysis – Scanning Electron Microscopy and Time of Flight – Secondary Ions Mass Spectroscopy sputtering depth profiling the presence of well adherent (Mn,Co,Fe)3O4 coatings with approximately 500 nm thickness and a grain size of about 150 nm was confirmed. After the preparation annealing, some samples were heat-treated in simulated cathodic atmospheres at 800 °C for 500 h in order to assess the stability of the coatings. GI-XRD spectra still showed the presence of the protective coatings, however sputtering depth profile analysis indicated the presence of Cr on the surface.

Investigation of Thin Coatings from Mn-Co-Fe System Deposited by PVD on Metallic Interconnects for SOFC Applications

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Development and Application of HVOF Sprayed Spinel Protective Coating for SOFC Interconnects

Fabrication of Mn–Co Alloys Electrodeposited on AISI 430 Ferritic Stainless Steel for SOFC Interconnect Applications

Cu doped Mn-Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications

Evaluation of Protective La0.67Sr0.33MnO3–δ Coatings on Various Stainless Steels Used for Solid Oxide Fuel Cell Interconnects

Iron doped manganese cobaltite spinel coatings produced by electrophoretic co-deposition on interconnects for solid oxide cells: Microstructural and electrical characterization

Fabricating a MnCo coating to improve oxidation resistance and electrical conductivity of Crofer22H alloy as SOFC interconnect

CrxN/Mn1.7Cu1.3 coating on ferritic stainless steel for solid oxide fuel cell interconnects

Mn 1.4 Co 1.4 Cu 0.2 O 4 spinel protective coating on ferritic stainless steels for solid oxide fuel cell interconnect applications

Ni–Co/ZrO2 Composite Coatings via Electroless Plating on Crofer 22APU for SOFC Interconnect Applications: Oxidation and Chromium Vaporization Behavior

Characterization of La0.8Sr0.2Co0.5Mn0.5O3-δ Coating on Alloy Interconnect in SOFC

Research on Fabrication and Property of NiMn2 O4 Coatings for Fe-Cr Alloy Interconnect Applications

The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect

The Preparation and Properties of Ti(Nb)-Si-C Coating on the Pre-Oxidized Ferritic Stainless Steel for Solid Oxide Fuel Cell Interconnect

Mn–Co spinel protective–conductive coating on AL453 ferritic stainless steel for IT-SOFC interconnect applications

The Effect of Metallic Co-Coating Thickness on Ferritic Stainless Steels Intended for Use as Interconnect Material in Intermediate Temperature Solid Oxide Fuel Cells

Review—(Mn,Co)3O4-Based Spinels for SOFC Interconnect Coating Application

Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects

Microstructure Evolution of Magnetron Sputtered Ce-Based Coatings for Solid Oxide Fuel Cell Interconnector: under the Anode Operating Environment

Cu and Y doped (Co, Mn)3O4 spinel coatings on Crofer ferritic alloy by composite electrodeposition