Abstract:Abstract High entropy alloy (HEA) is an advanced alloy material, which has a wide application prospect due to its excellent properties. However, the material removal mechanism and change rule of grinding force of HEA in the grinding process have seldom been studied. The main work of this paper is that the material removal mechanism of the FeCoNiCrMo 0.1 HEA is obtained by analyzing grinding debris and subsurface microstructure after grinding, the theoretical grinding force model of HEAs in plane grinding process is established on the basis of the force of a single abrasive grain, and the experimental verification is performed. According to the experimental results, the influences of different grinding parameters on grinding force are discussed, the influences of different types of grinding wheels on grinding force are analyzed, and the grinding forces generated by grinding different FeCoNiCr HEAs are compared. The results indicate that the material removal mechanism of FeCoNiCrMo 0.1 HEA is the plastic removal. With the increase of grinding speed and the decrease of grinding depth and feed speed, both normal and tangential grinding forces decrease. Under the same grinding parameters, the grinding force produced by electroplated CBN grinding wheel is greater, followed by resin-bonded CBN grinding wheel and vitrified CBN grinding wheel. The grinding force produced by grinding FeCoNiCrAl 0.1 HEA is lower than that produced by grinding FeCoNiCrMo 0.1 HEA under the same grinding conditions. The calculated value of grinding force model is consistent with the experimental value, which can scientifically reflect the variation law of HEA grinding force.

Experimental Research on Material Removal Mechanism and Grinding Force of FeCoNiCrMo0.1 High Entropy Alloy (HEA)

Surface Integrity Analysis in Grinding of Dual-phase High Entropy Alloy

Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy

Cutting Behavior of Al0.6CoCrFeNi High Entropy Alloy

Molecular Dynamics Simulation of a New Inhomogeneous Concentration Distribution Model Based on Frictional Behavior of FeNiCrCoCu High-Entropy Alloy

Microstructure and tribological properties of in-situ carbide/CoCrFeNiMn high entropy alloy composites synthesized by flake powder metallurgy

Probing the microstructure and deformation mechanism of an FeCoCrNiAl0.5 high entropy alloy during nanoscratching: a combined atomistic and physical model study

Investigations on the microstructures and tribological behaviors of as-cast CrFeCoNiCu x high entropy alloys

Microstructure and properties of FeCoNiCrX (X=Mn, Al) high-entropy alloy coatings

Microstructure and Properties of FeCrMnxAlCu High-Entropy Alloys and Coatings

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Metastable FeCrMnCo HEAs with the reinforcement of tungsten carbide fabricated by laser melting: Microstructure, mechanical properties and tribological behaviors

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings

Microstructure, mechanical and tribological properties of CoCrFeNi high-entropy alloy fabricated by different preparing processes

Microstructure and wear behavior of mechanically alloyed powder AlxMo0.5NbFeTiMn2 high entropy alloy coating formed by laser cladding

Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy

Alloying behavior and characterization of (CoCrFeNiMn)90M10 (M=Al, Hf) high-entropy materials fabricated by mechanical alloying

Flat-end mill machining analysis of processed CrMnFeCoNi high-entropy alloys

Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions

Mechanical Properties and Tribological Behavior of Al0.5CoCrFeNb0.5Ni High-Entropy Alloy at High Temperatures