Abstract:We present a reduced-order model and closed-form expressions describing the response of a micromechanical filter made up of two clamped-clamped microbeam capacitive resonators coupled by a weak microbeam. The model accounts for geometrical and electrical nonlinearities as well as the coupling between them. It is obtained by discretizing the distributed-parameter system using the Galerkin procedure. The basis functions are the linear undamped global mode shapes of the unactuated filter. Closed-form expressions for these mode shapes and the coressponding natural frequencies are obtained by formulating a boundary-value problem (BVP) that is composed of five equations and twenty boundary conditions. This problem is transformed into solving a system of twenty linear homogeneous algebraic equations for twenty constants and the natural frequencies. We predict the deflection and the voltage at which the static pull-in occurs by solving another boundary-value problem (BVP). We also solve an eigenvalue problem (EVP) to determine the two natural frequencies delineating the bandwidth of the actuated filter. Using the method of multiple scales, we determine four first-order nonlinear ODEs describing the amplitudes and phases of the modes. We found a good agreement between the results obtained using our model and the published experimental results. We found that the filter can be tuned to operate linearly for a wide range of input signal strengths by choosing a DC voltage that makes the effective nonlinearities vanish.

A Discretization Approach to Modeling Capacitive MEMS Filters

Numerical Analysis of Tunable Filter Based on MOEMS Technology Driven by Electrostatic Force

Macromodeling Of The Electrostatically Actuated Rectangle Plate Based On Modal Projection

Mechanical Synchronization of MEMS Electrostatically Driven Coupled Beam Filters

Performance analysis of FEM simulated different shaped membranes based capacitive MEMS sensor

A Closed-Form Approach for the Resonant Frequency Analysis of Clamped Rectangular Microplates under Distributed Electrostatic Force

Feasibility Study of a Capacitive MEMS Filter Using Electrostatic Levitation

Modified Modeling and System Stabilization of Shunt Active Power Filter Compensating Loads with Μf Capacitance

Modeling the Electrostatic Deflection of a MEMS Multilayers Based Actuator

New architectures for micromechanical coupled beam array filters

Numerical Simulation and Analysis of Electrically Actuated Microbeam-Based MEMS Capacitive Switch

A Behavioral Nonlinear Modeling Implementation for MEMS Capacitive Microphones

Analytical Modeling of CMUTs in Coupled Electro-Mechano-Acoustic Domains Using Plate Vibration Theory

Mathematical modeling of an electrostatic MEMS with tilted elastomeric micro-pillars

Numerical Simulation And Analysis Of An Electroactuated Mems Capacitive Switch Using Finite Element Method

Nonlinear dynamical system of micro-cantilever under combined parametric and forcing excitations in MEMS

Lumped Element Model for CMUTsBased Biochemical Resonant Sensor

Calculation Of Equivalent Parameters In Cmut 1-D Theoretical Model

Integrated RF MEMS/CMOS Devices

Nonlinear Dynamic Analysis of Electrostatically Actuated Resonant MEMS Sensors under Parametric Excitation

Numerical Modeling and Experimental Investigation of Resonance Properties of Microwave Capacitors