Abstract:Acoustical materials are usually used for architectural design, ambient noise, and traffic noise to absorb sound. The sound absorption coefficient (SAC) is often used as the performance index of acoustical materials. It is measured using the reverberation room method (RRM) and the impedance tube method (ITM). The sound source of the RRM is a random incidence in various directions, whereas that of the ITM is a normal incident. The SAC measured by the RRM is more extensive, practical, and costly than ITM. Usually, the SAC measured by RRM is used as the commercially available acoustical materials index. However, RRM requires large-area test samples for measurement and a special sound field of reverberation room for test experiments. Therefore, this study aims to use the ITM to measure SAC. The measured SAC, frequency, thickness, and material density were employed as independent variables and substituted in the obtained multiple regression model to predict SAC obtained by RRM. In addition, the measurement characteristics of impedance tubes provide varisized calibers for different frequency ranges to measure a relatively accurate SAC. Based on the abovementioned characteristics, this study proposed a dual-model for estimating the SAC of the reverberation room method to achieve the best-estimated result. After experimental validation, the dual-model estimated result was compared with SAC from the reverberation room method. It was observed that the maximum absolute value of all errors did not exceed 0.16. Most of the absolute errors were below 0.1, proving the accuracy of this method. Therefore, the method proposed in this study can shorten the acoustical material development schedule for manufacturers and save the cost of the development process.

Measurement of sound absorption coefficient in a reverberant room using probability density function of damping constant

Measurement of the absorption coefficient for acoustical coating samples using multi-channel inverse filter

Estimation of Sound absorption Coefficient from the Sound Power

Finite element sound field analysis on measurement of absorption coefficient in a reverberation room -Relationships between inclination of walls and measurement results-

Investigation on measurement sound field of absorption coefficient in reverberation room by numerical simulation - Relationship between room shapes and measurement results -

Sound absorption coefficient measurement for various building elements

Estimation of sound absorption coefficient at modal frequencies using decay time measurements and eigenvalue model in a small room

Computer Simulation Model for Room Diffuse Sound Field

A Note on Using Panel Diffusers to Improve Sound Field Diffusivity in Reverberation Rooms below 100 Hz

Tuning of Estimated Sound Absorption Coefficient of Materials of Reverberation Room Method

Performance optimisation of small reverberant room with hanging diffusers

Diffusion equation-based modelling of reverberation chambers for sound absorption measurements

Practical applications at field environments of sound absorption measurement method using the ensemble averaging technique

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

A Revised Sound Energy Theory Based on a New Formula for the Reverberation Radius in Rooms with Non-Diffuse Sound Field

Damping Density of an Absorptive Shoebox Room Derived from the Image-Source Method

Further improvements of the measurement method for sound absorption characteristics using the ensemble averaging technique

Measurement of the diffuse field sound absorption using a sound field synthesis method

Theoretical estimation of sound absorption characteristics in a collection of rectangular holes: Comparison with experimental results

Calculation of statistical absorption coefficient using ensemble averaged surface normal impedance of material

Machine-learning-based estimation of absorption coefficients from transfer functions modeled by equivalent sources