Abstract:Acoustical materials are usually used for architectural design, ambient noise, and traffic noise to absorb sound. The sound absorption coefficient (SAC) is often used as the performance index of acoustical materials. It is measured using the reverberation room method (RRM) and the impedance tube method (ITM). The sound source of the RRM is a random incidence in various directions, whereas that of the ITM is a normal incident. The SAC measured by the RRM is more extensive, practical, and costly than ITM. Usually, the SAC measured by RRM is used as the commercially available acoustical materials index. However, RRM requires large-area test samples for measurement and a special sound field of reverberation room for test experiments. Therefore, this study aims to use the ITM to measure SAC. The measured SAC, frequency, thickness, and material density were employed as independent variables and substituted in the obtained multiple regression model to predict SAC obtained by RRM. In addition, the measurement characteristics of impedance tubes provide varisized calibers for different frequency ranges to measure a relatively accurate SAC. Based on the abovementioned characteristics, this study proposed a dual-model for estimating the SAC of the reverberation room method to achieve the best-estimated result. After experimental validation, the dual-model estimated result was compared with SAC from the reverberation room method. It was observed that the maximum absolute value of all errors did not exceed 0.16. Most of the absolute errors were below 0.1, proving the accuracy of this method. Therefore, the method proposed in this study can shorten the acoustical material development schedule for manufacturers and save the cost of the development process.

Diffusion equation-based modelling of reverberation chambers for sound absorption measurements

Computer Simulation Model for Room Diffuse Sound Field

A computer simulation model for room sound field considering diffuse reflection

Hybrid Method of Image Source Model and Diffuse Surface Integration for the Simulation of Room Sound Field

An Energy Diffusion Model for Interior Acoustics With Structural Coupling Using the Boundary Element Method

Simulation of building indoor acoustics using an acoustic diffusion equation model

Performance optimisation of small reverberant room with hanging diffusers

Estimation of the random incidence sound absorption coefficients of different size rectangular samples

Finite element sound field analysis on measurement of absorption coefficient in a reverberation room -Relationships between inclination of walls and measurement results-

Acoustic Source Localization in a Reverberant Environment Based on Sound Field Morphological Component Analysis and Alternating Direction Method of Multipliers

Tuning of Estimated Sound Absorption Coefficient of Materials of Reverberation Room Method

Benchmarking of finite-difference time-domain method and fast multipole boundary element method for room acoustics

Measurement of the diffuse field sound absorption using a sound field synthesis method

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

A Note on Using Panel Diffusers to Improve Sound Field Diffusivity in Reverberation Rooms below 100 Hz

A Revised Sound Energy Theory Based on a New Formula for the Reverberation Radius in Rooms with Non-Diffuse Sound Field

Computationally-efficient and perceptually-motivated rendering of diffuse reflections in room acoustics simulation

A hybrid room acoustic modeling approach combining image source, acoustic diffusion equation, and time-domain discontinuous Galerkin methods

Investigation on measurement sound field of absorption coefficient in reverberation room by numerical simulation - Relationship between room shapes and measurement results -

Room dimensions and absorption inference from room transfer function via machine learning

Multiple random scattering ray-tracing model and computer simulation