Abstract:The Equivalent Source Method (ESM) consists of modeling the acoustical field radiated or scattered from an object by a set of radiating monopole sources located below its surface. While highly efficient for modeling the scattered field by a smooth object, ESM becomes less effective in representing acoustic diffraction from sharp edges. In this article, ESM is understood as an approximation to the single layer integral equation. In this framework, ESM belongs to the family of Indirect Boundary Element Methods (BEM) with an implicit surface mesh slightly below the object surface, and a zero order integration scheme on each element of the mesh. This implicit mesh is well approximated by the Voronoi diagram associated to the source distribution. This formalism establishes a strong link between these two widely used methods (ESM and BEM) and allows the construction of hybrid methods that can combine performances of both methods. On the first hand, a new hybrid method able to model edge diffraction while remaining as computationally efficient as ESM is developed. In this method, labeled “BEM Voronoi”, equivalent sources are positioned on the surface’s object rather than below it and singularities are handled with the integral formulation. On the other hand, a set of new hybrid methods which combines ESM with higher order integration scheme is constructed. Performances of the new methods developed in this paper are numerically compared to each other and to Finite Element simulations (used as a reference) for modeling scattering from an object excited by a plane wave. Each hybrid model is tested on multiple configurations involving two sets of boundary conditions (rigid and elastic objects respectively) successively immersed in two different external environments (water and air) and for both smooth and a sharp-edged objects. The results show that the hybrid method “BEM Voronoi” better handles edge diffraction than conventional ESM, at a much lower computational cost (implementation of BEM Voronoi is 50 times faster than conventional BEM implementation).

An Energy Diffusion Model for Interior Acoustics With Structural Coupling Using the Boundary Element Method

Computer Simulation Model for Room Diffuse Sound Field

Hybrid Method of Image Source Model and Diffuse Surface Integration for the Simulation of Room Sound Field

Simulation of building indoor acoustics using an acoustic diffusion equation model

Diffusion equation-based modelling of reverberation chambers for sound absorption measurements

A coherent model of sound propagation in long enclosures with different acoustics boundaries

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

An equivalent source method for acoustic problems with thermoviscous effects

A 2.5D acoustic finite element method applied to railway acoustics

A hybrid room acoustic modeling approach combining image source, acoustic diffusion equation, and time-domain discontinuous Galerkin methods

Benchmarking of finite-difference time-domain method and fast multipole boundary element method for room acoustics

Modeling of Sound Scattering by an Obstacle Located below a Hardbacked Rigid Porous Medium

The equivalent source method is an indirect boundary element method with an implicit Voronoi mesh

Analysis of acoustic radiation problems involving arbitrary immersed media interfaces by the extended finite element method with Dirichlet to Neumann boundary condition

Acoustic modeling and eigenanalysis of coupled rooms with a transparent coupling aperture of variable size

Low-Frequency Acoustic-Structure Analysis Using Coupled FEM-BEM Method

A reduced-order boundary element method for two-dimensional acoustic scattering

Acoustic modeling and eigenanalysis of the coupled cavities with panels

Fast multipole accelerated boundary element methods for room acoustics

Theoretical analysis of sound propagation and entropy generation across a distributed steady heat source

Interior three-dimensional acoustic modeling and modal analysis using wavelet-based finite-element approach