Abstract:Options for increasing the sound absorption in an existing room may be highly limited, especially when it concerns architectural heritage. In order to expand the number of possible options for large spaces, sound absorbing chandeliers with integrated lighting have been developed and their performance for reverberation control and for the reduction of background multitalker speech noise has been investigated. Prototypes of several chandelier designs have been constructed by assembling existing absorbing elements into relatively dense arrangements. Reverberation room tests have confirmed that the equivalent absorption area of such a chandelier can be approximately predicted from relevant sound absorption data of its constituting elements. When sound absorbing chandeliers are suspended from the ceiling in a room such that the ceiling is the main absorptive surface, the inhomogeneous absorption distribution over the room results in a directional sound field and this leads to a loss of efficiency for reverberation time control. The loss has been quantified, both numerically for a set of rooms, and experimentally for a large historic room. For the same rooms, the effectiveness of the sound absorbing chandeliers for the reduction of background noise during social gatherings has been assessed with a prediction model that accounts for the Lombard effect. Noise measurements have also been conducted in the historic room, during busy receptions before and after applying chandeliers. They are in good agreement with the predictions, at least when the number of persons in the room is increasing. When it is decreasing, the vocal effort is seen to remain at the maximum level, such that the background noise decreases less than expected. After confirmation with experimental data from a different room, the prediction model has been extended to account for this effect.

Performance optimisation of small reverberant room with hanging diffusers

Computer Simulation Model for Room Diffuse Sound Field

A Note on Using Panel Diffusers to Improve Sound Field Diffusivity in Reverberation Rooms below 100 Hz

Hybrid Method of Image Source Model and Diffuse Surface Integration for the Simulation of Room Sound Field

Diffusion equation-based modelling of reverberation chambers for sound absorption measurements

Development and performance assessment of sound absorbing chandeliers for reverberation control and improved verbal communication in large rooms

A validated finite element model for room acoustic treatments with edge absorbers

Towards an active semi-anechoic room: simulations and first measurements

Sound Quality Inside Small Meeting Rooms with Different Room Shape and Fine Structures

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

Measurement of the diffuse field sound absorption using a sound field synthesis method

Computationally-efficient and perceptually-motivated rendering of diffuse reflections in room acoustics simulation

Validation of an Optimization Procedure to Improve Low Frequency Characteristics of Rooms

Finite element sound field analysis on measurement of absorption coefficient in a reverberation room -Relationships between inclination of walls and measurement results-

Room acoustic computer modeling—A case study to compare industry standard software with measured results

Open-source platforms for fast room acoustic simulations in complex structures

The effect of furniture on room acoustic parameters and its dependence on different suspended ceilings' sound absorptive properties

Ceiling baffles and reflectors for controlling lecture-room sound for speech intelligibility

Investigating the Potential of Transparent Parallel-Arranged Micro-Perforated Panels (MPPs) as Sound Absorbers in Classrooms

Study of Influence of Air Gap Generated by Middle-Span Support for the Horizontal Stirrer on the Performance of a Reverberation Chamber

Reverberation Time Control by Acoustic Metamaterials in a Small Room