Abstract:Acoustical materials are usually used for architectural design, ambient noise, and traffic noise to absorb sound. The sound absorption coefficient (SAC) is often used as the performance index of acoustical materials. It is measured using the reverberation room method (RRM) and the impedance tube method (ITM). The sound source of the RRM is a random incidence in various directions, whereas that of the ITM is a normal incident. The SAC measured by the RRM is more extensive, practical, and costly than ITM. Usually, the SAC measured by RRM is used as the commercially available acoustical materials index. However, RRM requires large-area test samples for measurement and a special sound field of reverberation room for test experiments. Therefore, this study aims to use the ITM to measure SAC. The measured SAC, frequency, thickness, and material density were employed as independent variables and substituted in the obtained multiple regression model to predict SAC obtained by RRM. In addition, the measurement characteristics of impedance tubes provide varisized calibers for different frequency ranges to measure a relatively accurate SAC. Based on the abovementioned characteristics, this study proposed a dual-model for estimating the SAC of the reverberation room method to achieve the best-estimated result. After experimental validation, the dual-model estimated result was compared with SAC from the reverberation room method. It was observed that the maximum absolute value of all errors did not exceed 0.16. Most of the absolute errors were below 0.1, proving the accuracy of this method. Therefore, the method proposed in this study can shorten the acoustical material development schedule for manufacturers and save the cost of the development process.

Practical applications at field environments of sound absorption measurement method using the ensemble averaging technique

Further improvements of the measurement method for sound absorption characteristics using the ensemble averaging technique

Calculation of statistical absorption coefficient using ensemble averaged surface normal impedance of material

Machine-learning-based estimation of absorption coefficients from transfer functions modeled by equivalent sources

Computer Simulation Model for Room Diffuse Sound Field

Measurement of the diffuse field sound absorption using a sound field synthesis method

Finite element sound field analysis on measurement of absorption coefficient in a reverberation room -Relationships between inclination of walls and measurement results-

Investigation on measurement sound field of absorption coefficient in reverberation room by numerical simulation - Relationship between room shapes and measurement results -

Characterization of acoustic materials at arbitrary incidence angle using sound field synthesis

Tuning of Estimated Sound Absorption Coefficient of Materials of Reverberation Room Method

Extension of frequency range of the eight-microphone method in normal-incidence sound absorption coefficient measurement by eliminating influence of the first radial mode

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

Evaluation of the acoustic and non-acoustic properties of sound absorbing materials using a three-microphone impedance tube

Technical Note: Test Procedure and User Interface for Determination of the Acoustic Properties of Materials Using the Two-Microphone Transfer Function Method

Measurement of the sound absorption coefficient for an advanced undergraduate physics laboratory

Finite element analysis of sound fields in the corridors of the hospital ward: Investigation on installing patterns of sound absorbing materials

High-frequency measurement method of normal-incidence sound absorption coefficient with a square cross-section impedance tube using eight microphones

Acoustic Source Localization in a Reverberant Environment Based on Sound Field Morphological Component Analysis and Alternating Direction Method of Multipliers

Sound absorption coefficient measurement for various building elements

FIELD MEASUREMENT OF AIRBORNE SOUND INSULATION BETWEEN ROOMS

Data-driven estimation of sound absorption coefficients considering the positions of microphones