Abstract:Sound absorbing materials have been widely used to decrease hazardous noise in indoor and outdoor environments. In the present study, we designed and constructed an experimental laboratory-scale chamber to measure the sound absorption coefficients of porous materials in comparison with the measurements of the test tube method. The main reason was to design and construct a small chamber to enable testing of acoustic material samples in small dimensions allowing easy and rapid testing of acoustic materials. The acoustic chamber method was based on the formation of reverberation field of the acoustic waves across testing chamber locations, but differences in sound pressure throughout the chamber may result in measurement errors. Therefore, the chamber was constructed with a volume of 2.85 m3, wall reflectors, and a rotating sound source was designed to ensure a diffusive field. The tests were conducted with samples of 12.4m2 installed on interior surfaces of the chamber. Sound absorption coefficients of acoustic polyethylene and polyurethane absorbents were measured across the central frequencies of the octave band. Sound absorption coefficients under reverberant random incidence and normal incidence were related to the sound frequency. The chamber method predicted higher sound absorption coefficients compared to the coefficients obtained by the tube test method for all tested porous materials. Based on the results of the proposed small chamber, it can be concluded that sound absorption coefficients measurement of samples in an environment was more similar to real situations.

FIELD MEASUREMENT OF AIRBORNE SOUND INSULATION BETWEEN ROOMS

Airborne Sound Insulation of Sandwich Partition Panels and Masonry Constructions for Noise Control

Investigation of vibration-based measurements of impact and airborne noise insulation

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

Field measurement of reverberation time and average absorption of one high-rise building room by road traffic noise penetrating facade

Sound absorption coefficient measurement for various building elements

Practical applications at field environments of sound absorption measurement method using the ensemble averaging technique

Finite element sound field analysis on measurement of absorption coefficient in a reverberation room -Relationships between inclination of walls and measurement results-

Binaural room acoustics

Room acoustic computer modeling—A case study to compare industry standard software with measured results

Single-number values versus subjective judgment of airborne sound insulation in dwellings

Sound insulation properties of materials and methods used in civil engineering

Evaluating acoustical qualities of four rooms using questionnaires

Theoretical and numerical analysis on low-frequency sound transmission from façades into room

Measurement of the diffuse field sound absorption using a sound field synthesis method

Measurement of the sound absorption coefficient for an advanced undergraduate physics laboratory

Investigation on measurement sound field of absorption coefficient in reverberation room by numerical simulation - Relationship between room shapes and measurement results -

Preliminary Study on the Speech Privacy Performance of the Fabpod

Contributions of various transmission paths to speech privacy of open ceiling meeting rooms in open-plan offices

Investigating the Potential of Transparent Parallel-Arranged Micro-Perforated Panels (MPPs) as Sound Absorbers in Classrooms

The Attenuation,Reflection and Transmission of Solid-borne Sound Wave in Buildings