Abstract:Triply periodic minimal surface (TPMS) sandwich panels have superior characteristics, including lightweight and extraordinary mechanical properties, so that they are widely applied in diverse industrial and engineering applications. However, their sound suppression potential is far away understood. The present study investigates P- and G-type TPMS sandwich panels’ sound insulation performances with two different boundary conditions through a method combining theoretical, numerical, and experimental studies. First, we use Reissner's theory for sandwich panels to construct the vibration governing equation for the four-sided simply supported TPMS sandwich panel. By introducing sound pressure as double Fourier series into the vibro-acoustic governing equation, we derive the theoretical solution for the sound transmission loss (STL) performance. Second, we employ the sound impedance tube method to experimentally investigate the STL performance of TPMS sandwich panels with free boundary conditions. Then, we numerically study the TPMS sandwich panels’ suppression of sound capacity under both boundary conditions based on the direct acoustic vibration coupling theory. The results obtained by the theoretical, numerical and experimental methods are in good agreement and demonstrate that the TPMS sandwich panels’ relatively good sound suppression ability. Last, we conduct parametric studies to correlate the TPMS sandwich panel design to STL performance. Results show that the G-type TPMS sandwich panel is significantly superior to the P-type TPMS sandwich panel in terms of sound insulation capacity, which can achieve sound insulation of more than 20 dB at a broad frequency range, extending from 250 to 5000 Hz by an ultrathin thickness of about 2.4 cm, approximately 1/57λ for the lowest working frequency. Besides, the P-type TPMS sandwich panel's sound insulation capacity is more sensitive to the chief design parameters than the G-type one. Moreover, the constant (C) and the lattice constant (T) have the least and the most considerate influence on the STL property for both the P- and G-type TPMS sandwich panels. The research findings reported in this study can provide practical ideas for lightweight structures’ noise suppression design.

Airborne Sound Insulation of Sandwich Partition Panels and Masonry Constructions for Noise Control

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Demountable Soundproof Rooms

Application of Cellulose and Paper-Based Products in Building Acoustics

FIELD MEASUREMENT OF AIRBORNE SOUND INSULATION BETWEEN ROOMS

An Experimental Study on the Acoustic Absorption of Sand Panels

Development of composite panels based on porous glass aerogels for acoustic applications

Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels

Investigating the Potential of Transparent Parallel-Arranged Micro-Perforated Panels (MPPs) as Sound Absorbers in Classrooms

Testing the absorption coefficient of 3D printed perforated panels

Effect of air gap on sound absorption in layered composite structures produced of sustainable materials

Improvement of the sound absorption performance of sandwich panel using inhomogeneous micro-perforations

Revealing the sound insulation capacities of TPMS sandwich panels

Thermal properties and Life Cycle Assessment of new eco-sandwich panel for building thermal insulation

Sound Transmission Through Simply Supported Finite Double-Panel Partitions with Enclosed Air Cavity

Acoustic properties of glubam and SPF

Evaluation of Sound Insulation Performance of Extruded Cement Panel with a-Hemihydrate Gypsum

Sound Insulation of Corrugated-Core Sandwich Panels: Modeling, Optimization and Experiment

Sound insulation properties of materials and methods used in civil engineering

Investigation of vibration-based measurements of impact and airborne noise insulation

Sound absorption characteristics of open brick/block absorbing walls