Abstract:The research described in the article addresses the problem of measurement, prediction and practical use of the acoustic properties of materials determined in an impedance tube. The aim of the research was to develop a simple calculation model for the insertion loss of small machinery enclosures, based on the normal incidence sound transmission loss and the normal incidence sound absorption coefficient of porous and fibrous materials. Both experimental and model tests were carried out on materials such as mineral wool, melamine foam and rebonded polyurethane foam. Assessing the absorption properties of the tested porous and fibrous materials was performed using selected theoretical models, relating the calculations of the normal incidence sound absorption coefficient to measurements of this parameter conducted using an impedance tube. The application of the modified Allard and Champoux model brought the best results with the smallest discrepancies of the obtained results in relation to the experimental tests. Assessing the sound-insulating properties of the tested mineral wool was carried out using the proposed calculation model for the normal incidence sound transmission loss, relating the obtained results to measurements conducted using an impedance tube. The assessment of the sound-insulating properties of porous and fibrous materials was performed using the proposed calculation model for insertion loss, which was validated using two prototype test stands for determining the insertion loss of cubic enclosures, in this case with walls made of porous and fibrous materials. Satisfactory results were obtained for engineering applications in the calculation results using the proposed models with respect to measurements. The results may have practical applications in assessing the effectiveness of acoustic enclosures, in which the basic construction material is an appropriate porous or fibrous plate, selected to have both sound-absorbing and sound-insulating properties.

Evaluation of the acoustic and non-acoustic properties of sound absorbing materials using a three-microphone impedance tube

Comparison of Methods for Characterizing Sound Absorbing Materials

Distinctive Approaches to High-Frequency Acoustic Parameter Characterization in Rigid Porous Media

Acoustic properties test of materials by the dual-microphones broadband impulse method

Development of an experimental set-up to measure sound absorption coefficients of porous materials

A Method of Measuring Acoustic Absorption Coefficient of a Material Specimen Using a Dynamic Microphone

Validation study of in situ sound absorption measurement

Characterization of acoustic materials at arbitrary incidence angle using sound field synthesis

A Method Of Measuring The Acoustic Absorption Coefficient Of A Material Specimen At One End Of A Tube Using A Dynamic Microphone At The Other End

Measurement of the diffuse field sound absorption using a sound field synthesis method

An Improved Approach for Normal-Incidence Sound Transmission Loss Measurement Using a Four-Microphone Impedance Tube

Measuring sound absorption properties of porous materials using a calibrated volume velocity source

A new technique for the measurement of the normal incidence absorption coefficient using an impedance tube and a single microphone with fixed position

Development of Impedance Tube to Measure Sound Absorption Coefficient

Measurements of the normal incidence sound absorption coefficient for Non-standard sized absorbers in impedance tubes

The feasibility of building an impedance tube to measure sound absorption coefficients of materials

Estimation of sound absorption of three-dimensional treatments based on impedance tube measurements

Acoustic modelling of 3D-printed hybrid materials: a preliminary study

Measurement of the sound absorption coefficient for an advanced undergraduate physics laboratory

Modelling the Acoustic Properties of Baffles Made of Porous and Fibrous Materials

The Practicality of Using Generic Acoustical Equipment in Impedance Tube Design