Abstract:For inspection of mechanical properties and integrity of critical components such as integrated circuits or composite materials by acoustic methodology, it is imperative to evaluate their acoustic reflection coefficients, which are in close correlation with the elastic properties, thickness, density, and attenuation and interface adhesion of these layered structures. An experimental method based on angular spectrum to evaluate the acoustic coefficient as a function of the incident angle, θ, and frequency, ω, is presented with high frequency time-resolved acoustic microscopy. In order to achieve a high spatial resolution for evaluation of thin plates with thicknesses about one or two wavelengths, a point focusing transducer with a nominal center frequency of 25 MHz is adopted. By measuring the V(z, t) data in pulse mode, the reflection coefficient, R(θ, ω), can be reconstructed from its two-dimensional spectrum. It brings simplicity to experimental setup and measurement procedure since only single translation of the transducer in the vertical direction is competent for incident angle and frequency acquisition. It overcomes the disadvantages of the conventional methods requiring the spectroscopy for frequency scanning and/or ultrasonic goniometer for angular scanning. Two substrates of aluminum and Plexiglas and four stainless plates with various thicknesses of 100 μm, 150 μm, 200 μm, and 250 μm were applied. The acoustic reflection coefficients are consistent with the corresponding theoretical calculations. It opened the way of non-destructive methodology to evaluate the elastic and geometrical properties of very thin multi-layers structures simultaneously.

The Practicality of Using Generic Acoustical Equipment in Impedance Tube Design

Development of Impedance Tube to Measure Sound Absorption Coefficient

A new technique for the measurement of the normal incidence absorption coefficient using an impedance tube and a single microphone with fixed position

The feasibility of building an impedance tube to measure sound absorption coefficients of materials

Measurement of the sound absorption coefficient for an advanced undergraduate physics laboratory

Experimental Study of the Absorption Coefficient of Acoustic Insulators for Undergraduate University Students

Evaluation of the acoustic and non-acoustic properties of sound absorbing materials using a three-microphone impedance tube

A Method Of Measuring The Acoustic Absorption Coefficient Of A Material Specimen At One End Of A Tube Using A Dynamic Microphone At The Other End

A Method of Measuring Acoustic Absorption Coefficient of a Material Specimen Using a Dynamic Microphone

An impedance tube technique for estimating the insertion loss of earplugs

Exploration into the sources of error in the two-microphone transfer function impedance tube method

Ground-truth validation of the "earbuds method" for measuring acoustic nasalance

Measuring sound absorption properties of porous materials using a calibrated volume velocity source

Technical Note: Test Procedure and User Interface for Determination of the Acoustic Properties of Materials Using the Two-Microphone Transfer Function Method

Transfer function technique for impedance and absorption measurements in an impedance tube using a single microphone

Acoustic attenuation coefficient measurement in extreme environments: Experimental characterization of uncertainty in multiple-reflection method

Angular Measurement of Acoustic Reflection Coefficients by the Inversion of V(z, T) Data with High Frequency Time-Resolved Acoustic Microscopy

Characterization of acoustic materials at arbitrary incidence angle using sound field synthesis

Measurements of the normal incidence sound absorption coefficient for Non-standard sized absorbers in impedance tubes

High-frequency measurement method of normal-incidence sound absorption coefficient with a square cross-section impedance tube using eight microphones

Bayesian estimations of dissipation, sound speed, and microphone positions in impedance tubes