Abstract:The ablation threshold, depth and crater shape of fused silica for femtosecond laser processing are investigated theoretically and experimentally. Based on tracking the spatiotemporal distribution of the free electron density, free electron temperature, and laser intensity, the electron dynamics as well as the transient optical and thermophysical properties of femtosecond laser irradiated fused silica are quantitatively determined. The numerical model is validated by comparing the calculated threshold fluence, depth and crater shape of ablation with the experimentally measured ones at a wavelength of 800 nm. The free electron relaxation time at different laser fluences and pulse durations throughout the photoionization process and impact ionization process are probed. In the present work, the findings are as follows. 1) The electron relaxation time significantly affects the material optical properties and femtosecond laser energy absorption. The optical properties change dramatically. The fused silica becomes opaque for the case of laser irradiation with fluence higher than the ablation threshold. Moreover, the transition from electron-phonon collision to electron-ion collision accompanies with the femtosecond laser ablation of fused silica. 2) By using the proposed model, the experimentally observed saturation of ablation depth at high laser fluence is elucidated by the significant change of optical reflectivity and absorption coefficient. Both the results of theoretical simulation and experimental observation indicate that laser fluence has a strong influence on the shape of the ablation crater. The ablation volume increases sharply with the increase of laser fluence for femtosecond laser irradiation, compared with that for picosecond laser irradiation. 3) With the increase of femtosecond laser fluence, the ablation depth removal efficiency and ablation efficiency are both saturated, followed by slight decrements. The peak of ablation depth removal efficiency peak occurs at the femtosecond laser fluence close to 1.4 times of the ablation threshold. While the accuracy is slightly low due to the higher sensitivity of the ablation characteristics (ablation crater depth and ablation volume) to the shorter femtosecond laser pulse. For the femtosecond laser fluence higher than 3.5 times of the ablation threshold, good repeatability over a very wide fluence range can achieve accurate processing results, because a more consistent flat-bottom ablation profile tends to appear. However, the heat-affected zone leads the processing quality to degrade, compared with the scenario of femtosecond laser fluence close to the ablation threshold.

Study on Ablation Characteristics of Femyosecond Laser Nanoscale Processing for Aluminum Nitride and LeadZirconate Titanate Ceramics

Ablation Of Crystalline Oxides By Infrared Femtosecond Laser Pulses

Numerical and Experimental Investigation on Pulsed Nanosecond Laser Ablation Processing of Aluminum Alloy

Two-dimensional Numerical Simulation of Laser-Ablation of Aluminum Material by Nanosecond Laser Pulse

Ablation of Metallic Targets by High-Intensity Ultrashort Laser Pulses

Enhancement of Ablation and Ultrafast Electron Dynamics Observation of Nickel-Based Superalloy under Double-Pulse Ultrashort Laser Irradiation

Physics of picosecond pulse laser ablation

On Ablation Characteristics Based on Two-Temperature Model Involving a Multivariate Lattice Heat Capacity by Ultrashort Laser-Irradiated in Zirconia

Ablation Characteristic Analysis of Short Pulse Laser Processing Composite Materials

Mechanisms of femtosecond laser ablation of Ni3Al: Molecular dynamics study

Ultrashort Pulse Laser Processing of ZrO2 Ceramics

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica

Ablation Characteristics and Interaction Mechanism of Ultra-Fast Pulse Laser-Induced Damage in Titanium Alloy

Investigation on efficiency and quality for ultrashort pulsed laser ablation of nickel-based single crystal alloy DD6

Study of Nanosecond Laser Ablation on Aluminum and Stainless Steel Targets

Study on 532 Nm Short/Ultrashort Pulse Laser Processing of Sapphire

Study on the thermal effects of femtosecond laser ablation on Ti-6A1–4V

Impact of Laser Fluence on Ablation Depth and Prediction of Morphology of Ablation Craters

Thermal Behavior of Thin Metal Films Irradiated by Shaped Femtosecond Pulse Sequences Laser

Ablation experiment and threshold calculation of titanium alloy irradiated by ultra-fast pulse laser

Laser ablation of metals by femtosecond pulses: Theoretical and experimental study