Abstract:The microstructure and texture evolution of a strip cast and of a hot rolled austenitic stainless steel (18% Cr, 8.5% Ni) during cold rolling was studied (maximum thickness reductionΔd/d0= 80%). The microstructure of the hot band was homogeneous through the sheet thickness, except that in the centre layer a small volume fraction of martensite appeared. The hot band texture revealed a through-thickness gradient which was discussed in terms of the shear distribution during hot rolling. The microstructure of the cast strip showed globular grains with martensite in the centre layer and blocks of austenitic dendrites in the other layers. The formation of martensite was attributed to the deformation of the solidified films in the rolling gap. The strip cast sample revealed a weak texture fibre close to {001}〈uvw〉 which was interpreted in terms of growth selection during solidification. During cold rolling in both types of samples the volume fraction of martensite increased up to ≈ 50 vol.% (80% reduction). The cold rolling texture of the austenite was in both cases characterized by {011}〈211〉 and {011}〈100〉. The cold rolling texture of the hot band was stronger than that of the strip cast sample which was attributed to the influence of the starting texture and of the grain size. The cold rolling texture of the austenite was simulated by means of a Taylor type model considering grain interaction and the so-called card glide mechanism. The martensite texture was characterized by {211}〈011〉 and {111}〈211〉. The former component was interpreted in terms of the relaxation of shear constraints. The latter was attributed to selective phase transformation of {011}〈211〉 (austenite) to {332}〈113〉 (martensite) which then rotated towards {111}〈112〉. The rolling textures of the martensite were simulated using a Sachs type deformation model.

Through Thickness Microstructural Investigation of Temper Rolled Ferritic Steels for Thin Sheet Applications

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

An Investigation of Friction Coefficient on Microstructure and Texture Evolution of Interstitial-Free Steel during Warm Rolling and Subsequent Annealing

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

Microstructure, Texture, and Deep Drawability under Two Different Cold-Rolling Processes in Ferritic Stainless Steel

Microstructural Evolution of IF-steel During Cold Rolling

Grain Refinement and Texture Change in Interstitial Free Steels after Severe Rolling and Ultra-Short Annealing

An Investigation on the Microstructure and Mechanical Properties in an Ultrafine Lamellar Martensitic Steel Processed by Heavy Warm Rolling and Tempering

A Study on Microstructure, Texture and Precipitation Evolution at Different Stages of Steel Processing in Interstitial Free High Strength Steels

Influence of Microalloying Elements on Recrystallization Texture of Warm-Rolled Interstitial Free Steels

Effect of Warm Rolling Temperature on the Microstructure and Texture of Microcarbon Dual-Phase (DP) Steel

Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2

Texture and microstructure evolution during cold rolling of a strip cast and of a hot rolled austenitic stainless steel

Microstructure evolution and mechanical properties of metastable austenitic medium Mn steel fabricated by warm caliber rolling

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

Microstructure and Texture Development in a Thin Gauge Non Oriented Electrical Steel

Texture and microstructure development in cold-rolled interstitial free (IF) steel sheet during electric field annealing

Microstructure and Mechanical Properties of Medium Mn Steel Containing 3%al Processed by Warm Rolling

Microstructures and textures in cold-rolled aluminium strip

Analysis of Microstructure, Texture Evolution, and the Mechanism of Grain Refinement of Commercially Pure Titanium During Cold Rolling: Experiment and Simulation

Asymmetric Rolling of Interstitial-Free Steel Using Differential Roll Diameters. Part I: Mechanical Properties and Deformation Textures