Abstract:To achieve high-throughput generation of monodisperse double emulsions via controllable symmetric splitting, the splitting dynamics of double emulsions in Y-shaped microchannels are systematically investigated by the combination of experimental study and numerical simulation. Four distinct breakup flow patterns of double emulsions splitting are initially identified, namely non-breakup, once uneven breakup, twice uneven breakup and twice even breakup, and the underlying hydrodynamic mechanisms of each flow pattern are further elucidated through the flow field structures and pressure distributions. The results show that the upstream pressure created by the flow obstruction of continuous phase governs the stable and symmetric splitting of double emulsions in Y-shaped microchannels. Effects of the flowrates of continuous phase, the outer and inner diameters of double emulsions, the physical properties of all the inner, middle and outer fluids as well as the angle of Y-shaped microchannel on the flow pattern transition laws are systematically clarified, and the corresponding universal flow pattern diagrams for predicting the critical boundary for the transition of flow patterns are established. Based on controllable symmetric splitting of double emulsions, three-level splitting microfluidic networks are rationally designed to achieve high-throughput generation of monodisperse double emulsions as well as monodisperse microcapsules via template synthesis. The results in this study not only advance the deep understanding of the breakup dynamics of double emulsions in Y-shaped microchannels, but also offer valuable guidance for the rational design of microfluidic devices for mass production of monodisperse double emulsions, thus providing a significant contribution to the fields of micro-chemical engineering and droplet microfluidics.

Effect of cross-slot configuration in microfluidics on o/w emulsification at high throughput

Microfluidic Study of Effect of Dispersed Phase Viscosity and Continuous Phase Viscosity on Emulsification in a Cross-junction Chip

Drop dispenser in a cross-junction microfluidic device: Scaling and mechanism of break-up

Visualization Study of Oil-in-Water-in-Oil (O/W/O) Double Emulsion Formation in a Simple and Robust Co-Flowing Microfluidic Device

High-throughput Generation of Monodisperse Double Emulsions Via Controllable Symmetric Splitting in Y-shaped Microchannels

Screening of the Effect of Surface Energy of Microchannels on Microfluidic Emulsification.

Generation of Water-In-Oil-In-Water (W/O/W) Double Emulsions by Microfluidics

High-throughput Emulsification in a Microporous Tube-in-tube Microchannel Device: O/W Emulsion Formation

Drag reduction assisted emulsification in a micro-channel

Manipulating The Generation Of Uniform O/W And W/O Emulsions Using Microfluidic T-Junction

Manipulating T-Junction Chip for the Generation of Uniform O/W and W/O Emulsions

Emulsification in a Microfluidic Flow-Focusing Device: Effect of the Viscosities of the Liquids

Emulsification in a high-throughput microporous tube-in-tube microchannel system: water in oil emulsion formation

Shear Force Induced Monodisperse Droplet Formation in a Microfluidic Device by Controlling Wetting Properties

Numerical simulation of emulsion droplet formation in cross-j unction microfluidic channels

Experimental and theoretical analysis of emulsification characteristics using a high porosity microscreen under oscillatory shear conditions

Controllable Preparation of Monodisperse O/W and W/O Emulsions in the Same Microfluidic Device

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

High-Throughput Microfluidic Production of Droplets and Hydrogel Microspheres through Monolithically Integrated Microchannel Plates

High throughput membrane emulsification using a single‐pass annular flow crossflow membrane

Droplet Formation of Yield Stress Fluids in Asymmetric Parallelized Microchannels