Abstract:Mg and its alloys have been comprehensively studied and show huge potential for clinical orthopedic applications. However, balancing the mechanical strength and corrosion resistance of alloys is still a challenge. In light of this, micro-level contents of Zn and Ca were added to pure Mg to fabricate a Mg-2Zn-0.05Ca microalloy to expectedly enhance the mechanical strength and concurrently improve the corrosion resistance. The characteristics of the rolled Mg-2Zn-0.05Ca microalloy were explored using optical microscopy, X-ray diffraction, and tensile tests. The corrosion behavior and mechanical strength loss were explored using electrochemical and immersion tests. The effects of the microalloy extract on the proliferation, adhesion, and osteogenic differentiation of MC3T3-E1 cells were systematically studied. Moreover, implantations were done in femoral condyles of rabbits to study the degradation properties, osteogenic effect, mechanical strength loss, and biosafety of the microalloy. The ultimate tensile strength and yield strength of the rolled microalloy were found to be significantly elevated to 257 ± 2.74 and 237.6 ± 8.29 MPa, respectively. The microalloy showed a stable and gradual strength loss during degradation, both in vivo and in vitro. Concurrently, the microalloy exhibited improved corrosion resistance ability and especially, in vivo, the rolled microalloy exhibited a comparable degradation rate to that of rolled pure Mg within the initial 12 weeks of implantation. Additionally, the microalloy promoted osteogenesis, both in vitro and in vivo, and no short- and long-term toxicities of the microalloy were observed in rabbits. This study suggested that the rolled Mg-2Zn-0.05Ca microalloy effectively balanced the mechanical strength and corrosion resistance and showed potential application as bone implants.

Microstructure, Mechanical and Corrosion Properties and Biocompatibility of Mg-Y-Zn-Zr Rolled Alloy for Biomedical Applications

Microstructures and Properties of Biomedical Mg-Zn-Sn-Zr Rolled Alloys

Microstructure, Mechanical Properties, in Vitro Degradation and Cytotoxicity Evaluations of Mg–1.5Y–1.2Zn–0.44Zr Alloys for Biodegradable Metallic Implants

Mechanical properties and bio-corrosion behavior of Mg-Zn-Zr alloy influenced by rotary swaging

Microstructure, Mechanical Properties and Corrosion Behavior of Mg-Zn-Zr Alloys with Different Compositions

Substantial Improvement in Mechanical Properties and Anti‐corrosion Properties of Rolled Zn–Mg–Sr Alloys as an Orthopedic Implant

Microstructure, mechanical and corrosion properties of biodegradable Zn-Mg-Zr alloys for biomedical applications

Evaluation of As‐extruded Ternary Zn–Mg–Zr Alloys for Biomedical Implantation Material: in Vitro and in Vivo Behavior

Mechanical properties, corrosion, and biocompatibility of Mg-Zr-Sr-Dy alloys for biodegradable implant applications

Effect of Zr content on the microstructure, mechanical properties, electrochemical behavior, and biocompatibility of Mg–3Zn–xZr alloy using powder metallurgy

Microstructure, Mechanical Properties, Biocorrosion Behavior, and Cytotoxicity of As-Extruded Mg–Nd–Zn–Zr Alloy with Different Extrusion Ratios

Enhanced Mechanical Properties, Corrosion Resistance, Cytocompatibility, Osteogenesis, and Antibacterial Performance of Biodegradable Mg‐2Zn‐0.5Ca‐0.5Sr/Zr Alloys for Bone‐Implant Application

Microstructural, Mechanical, in Vitro Corrosion and Biological Characterization of an Extruded Zn-0.8Mg-0.2Sr (wt%) As an Absorbable Material.

Corrosion behavior and mechanical properties of extruded low-alloyed Mg−0.5Bi−0.5Y−0.2Zn alloy

In Vitro Degradation Performance and Biological Response of a Mg–Zn–Zr Alloy

Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications

Enhancing Strength-Ductility Synergy and Corrosion Residual Strength of Hot-Rolled Mg-2Zn-0.85Y Alloy

Microstructure, Mechanical Properties, Corrosion Behavior and Biocompatibility of As-Extruded Biodegradable Mg–3Sn–1Zn–0.5Mn Alloy

Microalloying Design of Biodegradable Mg-2Zn-0.05Ca Promises Improved Bone-Implant Applications

Influence of Zirconium (Zr) on the microstructure, mechanical properties and corrosion behavior of biodegradable zinc-magnesium alloys

Microstructure, mechanical properties, and in vitro behavior of biodegradable Zn-1Mg-0.1Ca and Zn-1Mg-0.5Ca