Abstract:X-ray micro-tomography (XMT) is increasingly used for the quantitative analysis of the volumes of features within the 3D images. As with any measurement, there will be error and uncertainty associated with these measurements. In this paper a method for quantifying both the systematic and random components of this error in the measured volume is presented. The systematic error is the offset between the actual and measured volume which is consistent between different measurements and can therefore be eliminated by appropriate calibration. In XMT measurements this is often caused by an inappropriate threshold value. The random error is not associated with any systematic offset in the measured volume and could be caused, for instance, by variations in the location of the specific object relative to the voxel grid. It can be eliminated by repeated measurements. It was found that both the systematic and random components of the error are a strong function of the size of the object measured relative to the voxel size. The relative error in the volume was found to follow approximately a power law relationship with the volume of the object, but with an exponent that implied, unexpectedly, that the relative error was proportional to the radius of the object for small objects, though the exponent did imply that the relative error was approximately proportional to the surface area of the object for larger objects. In an example application involving the size of mineral grains in an ore sample, the uncertainty associated with the random error in the volume is larger than the object itself for objects smaller than about 8 voxels and is greater than 10% for any object smaller than about 260 voxels. A methodology is presented for reducing the random error by combining the results from either multiple scans of the same object or scans of multiple similar objects, with an uncertainty of less than 5% requiring 12 objects of 100 voxels or 600 objects of 4 voxels. As the systematic error in a measurement cannot be eliminated by combining the results from multiple measurements, this paper introduces a procedure for using volume standards to reduce the systematic error, especially for smaller objects where the relative error is larger.

Potential error in density profile measurements for wood composites

Intra-Ring Wood Density and Dynamic Modulus of Elasticity Profiles for Black Spruce and Jack Pine from X-ray Densitometry and Ultrasonic Wave Velocity Measurement

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Exploring high frequency densitometry calibration functions for different tree species

X-ray densitometer for vertical density profile of Wood-based Panel

APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE

Quantifying and minimising systematic and random errors in X-ray micro-tomography based volume measurements

Quantitative X-ray fluorescence micro-analysis of wood samples and visualization of tree rings

Measuring Radial Variation in Basic Density of Pendulate Oak: Comparing Increment Core Samples with the IML Power Drill

Quantification of in vitro produced wear sites on composite resins using contact profilometry and CCD microscopy: a methodological investigation

Selected Errors in Spatial Measurements of Surface Asperities

Achieving highly accurate cavity thickness measurements in fabric compaction

Bone Apparent and Material Densities Examined by Cone Beam Computed Tomography and the Archimedes Technique: Comparison of the Two Methods and Their Results

Estimation of Wood Density with the Model of Indirect Adjustment.

A new method for nondestructive evaluation of solid wood moisture content based on dual-energy X-ray absorptiometry

Methods and tools for assessing the accuracy of composite property models

Correction of height-fluctuation-induced systematic errors in polymers by AFM-based nanomechanical measurements

Numerical simulation and method study of X-ray litho-density logging

A method to evaluate profilometric tooth wear measurements

Density profiles of novel kraft pulp and TMP based foam formed thermal insulation materials observed by X-ray tomography and densitometry

Quantitative Analysis of Biomass in Three Types of Wood-Plastic Composites by FTIR Spectroscopy