Abstract:In order to save heating energy and reduce carbon emission intensity, a floor heating room with built-in finned Trombe wall in Xining, Qinghai, a severe cold area, was taken as the research object. And ANSYS 2021 R1 was used to numerically investigate the effects of several major factors, such as fin height, fin transverse distance, fin longitudinal distance, fin inclined angle, fin shape, perforated shape and perforation ratio of perforated fin, on the average heat transfer coefficient ( h ) between the absorptive surface and the air in the interlayer . The results show that for fins with low heights, the enhancement effect of horizontal fins on the convective heat transfer of the absorptive surface of Trombe wall is greater than that of vertical fins. The enhancement effect of vertical fins on the convective heat transfer of the absorptive surface is more affected by fin transverse distance, while the enhancement effect of horizontal fins on the convective heat transfer of the absorptive surface is more affected by fin longitudinal distance. Besides, h shows a trend of first increasing and then decreasing with the increase of fin inclined angle, and reaches its maximum value of 5.89 W/(m 2 ·K) at 45°. The fins with different shapes are equilateral triangular fins, semicircular fins, isosceles triangular fins and rectangular fins in descending order of their enhancement effect on the heat transfer of wall. Compared with solid fins, fins with circular holes can obtain a better convective heat transfer effect only when the open area ratio is 1:6. While fins with equilateral triangular holes can obtain better convective heat transfer effect as long as the open area ratio is greater than 1:7. Fins with elliptical holes do not significantly improve the heat transfer effect. On the basis of optimizing the fin layout and structure, the thermal performance of the improved Trombe wall during the 8:00∼16:00 period and its impact on indoor thermal comfort of the building were studied, and the energy-saving performance of the plan was discussed. Compared with the Trombe wall room with no fins, the improved Trombe wall can improve the heat teransfer efficiency and the building energy saving rate by 68.50 % and 53.57 %, respectively. The improved Trombe wall can only ensure the indoor thermal comfort in limited several hours, in the rest of time, the residents should add clothing to keep warm. These conclusions have an important effect of engineering guidance and great realistic meanings for promoting the process of solar building integration and achieving the "carbon peak and carbon neutrality" target.

Impact on heat storage performance of concrete radiant floor with finned water supply pipes

Dynamic Performance of Water-Based Radiant Floors During Start-Up and High-Intensity Solar Radiation

Experimental and numerical study on heating performance of the mass and thin concrete radiant floors with ground source systems

Numerical Study on Thermal Performances of Bare, Circular and Rectangular Finned Pipes for Road Heating

Investigating the Effect of Solar Heat Gain on Intermittent Operation Characteristics of Radiant Cooling Floor

Thermal effect and optimal design of cooling pipes on mass concrete with constant quantity of water flow

Anti-Condensation Temperature Control Strategy of the Concrete Radiant Roof

Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes

Numerical study on the effect of optimizing the Trombe wall structure with built-in fins on improving building energy efficiency in severe cold region

Numerical Simulation of Heat Transfer Characteristics of Capillary Radiant Heating Floor

Evaluation and optimization of melting performance in a horizontal thermal energy storage unit with non-uniform fins

Thermal Analysis of Mass Concrete Embedded with Double-Layer Staggered Heterogeneous Cooling Water Pipes

Dynamic performance and multi-objective optimization of fin-concrete heat sinks

Dynamic thermal performance analysis for fin-concrete ceiling in main control rooms of passive nuclear power plants

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

Experimental and Numerical Study of the Influence of Solar Radiation on the Surface Temperature Field of Low-Heat Concrete in a Pouring Block

Heating Performance Enhancement for a Road Unit by Using Sectorial-Finned Pipe

Solidification of an annular finned tube ice storage unit

Calculation and Experimental Comparison of Temperature Field of Embedded Cooling Water Pipes and Their Application

A Semi-Analytical Model for Evaluating the Thermal Storage Capacity and Heat Use Efficiency of Flexible Thermal Storage Heating Floor

Experimental Study on Heat Transfer and Resistance Characteristics of H-Type Finned Tube