Abstract:<p>Joints transfer forces propped by members to other sections of space frame. It support and connect braces with other members which provide restraints to members. In general, joints behavior is ideally rigid or ideally pinned (flexible) in typical design and study of space frames; ideally rigid Joints cannot undergo rotation and ideally pinned joints cannot transfer moment. In reality, rigid joints have relative flexibility which makes them rotate and ideally pinned have means to transfer moments. Thus, real space frame both idealized models are not real and all joints present a semi-rigid behavior [1,2]. Thus, real joint in space frame is "semi-rigid". Several tests have plainly shown that joints behave nonlinear because of gradual yielding of joint parts such as; plates, angles, bolts. Space frame buildings use bolted joints. However, joint behavior is complex to analyze because of discontinuities in joints areas. Features which influence joints behavior includes; bolts positions and spacing, bolts pretension and material properties. Other features such as; joints parts and contact areas evolution, compression center positions and stiffeners presence can change joints behavior. Tests can predict joints behavior, as well as elaborated modeling and analytical approaches. Space frames joints work under axial force, shear force, and bending moment. However, for most joints, axial and shear deformations are usually small liken to bending deformation [2]. This work considers only joints rotational deformation because of bending action. The present paper includes design of Aluminum bolted joints and explores it behavior experimentally. Also it analyzes and models the moment-rotation behavior of these joints by using Finite Element Model and mathematical formulas. Which will finally help to integrate the moment-rotation curves efficiently into a Space frame analysis computer program.</p>

Study on Bolted Joints of U Frame of Simulation Turntable

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Structural mechanics analysis of bolt joint of rigid flexible coupling manipulator

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Strength Analysis of Bolt Joints for an Open Frame Structure

Investigation of aluminium bolted joint (HBJ) system behavior

Research on Key Joints Design of Mega Frame of the Shanghai Tower

Numerical Simulation and Experimental Analysis on Steel Semi-Rigid Joints

Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures

An improved 3D model of composite bolted joints with detailed thread structure and progressive damage analysis of realistic tightening process

Degradation and failure analysis of bolted joints under transverse loading

FINITE ELEMENT SIMULATION METHODS APPLIED TO BOLTED GUSSET PLATES USED AS SHEAR CONNECTORS

Numerical Simulation And Experimental Study On Bolted End-Plate Connections

Effect of preload distribution on dynamic characteristics of machine tool bolted joint structure

Study the muti-bolt fastening under different load positions in gear rack drilling rig

Study on hysteresis and threaded fitting behavior of bolted joint with non-parallel bearing surface

Strength Check Analysis of Axle Box and Bolted Joints of High-Speed Motor Trains

Finite element analysis of bolted joints under torsional loads

An improved 2D finite element model for bolt load distribution analysis of composite multi-bolt single-lap joints