Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Aluminium trihydrate-filled poly(methyl methacrylate) (PMMA/ATH) waste powder utilization in wood-plastic composite boards bonded by MUF resin

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Recycling Polyurethane Materials to Improve Properties of Wood Composite Panels

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts

Sustainable composites from agricultural waste: The use of steam explosion and surface modification to potentialize the use of wheat straw fibers for wood plastic composite industry

Morphologic and Chemical Properties of PMMA/ATH Layers with Enhanced Abrasion Resistance Realised by Cold Plasma Spraying at Atmospheric Pressure

Some Exploitation Properties of Wood Plastic Hybrid Composites Based on Polypropylene and Plywood Production Waste

Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy

Aluminum silicate fibers reinforced wood-plastic composites: A strengthening strategy based on the interfacial interactions between inorganic fibers and organic agricultural wastes

Preparation and Characterisation of Composites from Industrial Waste: Wood Flour and Expanded Ethylene Vinyl Acetate

Effects of Maleic Anhydride-Grafted Polyethylene on the Properties of Artificial Marble Waste Powder/Linear Low-Density Polyethylene Composites with Ultra-High Filling Content

Upcycling waste PMMA to durable composites via a transesterification‐inverse vulcanization process

Amide wax-assisted interfacial compatibilization of maleic anhydride-grafted polyethylene for high-performance wood-plastic composites

Enhanced water resistance of extruded wood–polypropylene composites based on alternative wood sources

Sustainable Engineering Polymer Composites Fabricated Using Delignified Bamboo Fiber as Reinforcement and Walnut Shell Powder as Filler

Comparative study of some properties of wood plastic composite materials produced with polyethylene, wood flour, and glass flour

In-situ preparation of novel composites of PMMA and Aluminum Carbide (Al4C3), investigation of thermal behavior and mechanical strength

Hydrophilic-Hydrophobic Characteristics of Wood-Polymer Composites Filled with Modified Wood Particles