Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Comparative study of some properties of wood plastic composite materials produced with polyethylene, wood flour, and glass flour

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

EFFECT OF WOOD FLOUR CONTENT ON THE PROPERTIES OF FLAT PRESSED WOOD PLASTIC COMPOSITES

Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets

Physical, Mechanical, and Flammability Properties of Wood–Plastic Composites (WPC) Containing Beech-Wood Flour and Flame-Retardant Additives

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Investigate on the physical and mechanical properties of wood-polymer composition materials made on the premise of neighborhood wood flours

A Review on Flexural Properties of Wood-Plastic Composites

Enhanced water resistance of extruded wood–polypropylene composites based on alternative wood sources

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Effects of Natural Fiber Waste, Content, and Coupling Agent on the Physical and Mechanical Properties of Wood Species–Plastic Composites as Green Materials

Some Exploitation Properties of Wood Plastic Hybrid Composites Based on Polypropylene and Plywood Production Waste

Mechanical properties of wood/plastic composites formed using wood flour produced by wet ball-milling under various milling times and drying methods

Mechanical Properties Variation in Wood—Plastic Composites with a Mixed Wood Fiber Size

Preparation and characterization of wood plastic composite produced from waste polystyrene with organic filler

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

High density polyethylene/wood flour composite: Optimization of processing temperature, processing time and coupling agent concentration

Properties of wood-plastic composites based on pvc/pla/pbat ternary blend

Possibility of using municipal solid waste for manufacturing wood-plastic composites: effects of natural weathering, wood waste types, and contents

Thermal, Mechanical and Morphological Behavior of Poly(propylene)/Wood Flour Composites

Mechanical properties of extruded continuous glass fiber reinforced wood Particle/HDPE composites: Effects of glass bundle tex and arrangement