Abstract:The properties of crosslinked polyethylene can be improved by adding wood particles. The improvements are higher when surface‐treated particles are used via maleated polyethylene. This paper presents a comprehensive investigation into the manufacturing of high‐performance wood‐crosslinked high‐density polyethylene composites (WxHDPEC). In particular, the effect of maleated polyethylene (MAPE) treatment and concentration (0–50 wt%) of maple wood fibers is investigated. The samples were produced via dry‐blending followed by compression molding and a set of characterization was performed including chemical, morphological, mechanical, thermal, and physical properties. The gel content was found to increase with increasing wood fiber content, while the surface modification significantly improved the tensile strength (11%), tensile modulus (298%), flexural strength (138%), and flexural modulus (81%). Thermal analyses also showed improved thermal stability and higher thermal resistance for the treated composites. Finally, the Shore D hardness increased by 11.0 (from 61.5 to 72.5) and 12.1 (from 61.5 to 73.6) points, while the Shore A hardness increased by 7.5 (from 91.5 to 99.0) and 8.1 (from 91.5 to 99.6) points for the untreated and treated composites, respectively. These improvements are attributed to effective adhesion between MAPE‐treated wood fibers and the xHDPE matrix. The findings not only advance our understanding of these complex materials but also provide alternatives for various applications from construction to automotive engineering. Highlights High‐performance wood‐reinforced crosslinked high‐density polyethylene was produced. The effect of maleated polyethylene (MAPE) treatment and maple wood fibers was studied. Higher crosslink density in MAPE‐treated wood‐xHDPE was obtained. Wood‐crosslinked high‐density polyethylene composites have better properties.

Amide wax-assisted interfacial compatibilization of maleic anhydride-grafted polyethylene for high-performance wood-plastic composites

Preparation and Characterization of Maleic Anhydride Compatibilized Poly(lactic acid)/Bamboo Particles Biocomposites

Interfacial adhesion mechanisms of ultra-highly filled wood fiber/polyethylene composites using maleic anhydride grafted polyethylene as a compatibilizer

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy

Bulk Polymerization of PEGDA in Spruce Wood Using a DBD Plasma-Initiated Process to Improve the Flexural Strength of the Wood–Polymer Composite

Enhancement of the Mechanical Properties of Basalt Fiber-Wood-Plastic Composites Via Maleic Anhydride Grafted High-Density Polyethylene (MAPE) Addition.

Influence of the use of Renewable Compatibility Agent Wood Plastic Composite (WPC)

Chemical Modifications of Continuous Aramid Fiber for Wood Flour/High-Density-Polyethylene Composites with Improved Interfacial Bonding

High‐performance wood‐reinforced crosslinked high‐density polyethylene composites

Preparation and properties of recycled polypropylene‐based wood–plastic composites reinforced with a bio‐based compatibilizer

Enhancement and Compatibilization of Waste-Sourced Biocomposites Through Elastomer Blending and Matrix Grafting Modification

Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites

Role of Maleated Coupling Agents on the Interface Adhesion of Polypropylene—Wood Composites

Strong and Durable Wood Designed by Cell Wall Bulking Combined with Cell Lumen Filling

Combining Fiber Enzymatic Pretreatments and Coupling Agents to Improve Physical and Mechanical Properties of Hemp Hurd/Wood/Polypropylene Composite

Towards high performance wood composites through interface customization with cellulose-based adhesive

STRUCTURAL ASSESSMENT OF LAMINATED WOOD VENEER/PLASTIC SHEET COMPOSITES USED AS BUILDING MATERIAL

High density polyethylene/wood flour composite: Optimization of processing temperature, processing time and coupling agent concentration

Interface Research of Wood/Plastic Composites Modified by Long Chain Segment Block Graft

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion