Abstract:Supercritical carbon dioxide (sCO 2 ) power cycles are attractive for renewable energy technologies as they exhibit high thermal efficiencies, compact components, and reduced cycle complexity and levelized cost of energy (LCOE) relative to traditional steam power cycles. Consequently, numerous studies have investigated different layouts and operating parameters in search of an optimal cycle configuration. Two cycle layouts provide promising results, namely the partial cooling with reheating (PCRH) cycle, and the recompression with intercooling and reheating (RCICRH) cycle. Both cycles utilise recuperators with high heat transfer rates and literature suggests that the cost for the recuperators may account for a significant portion of the total plant capital expenditure. When modelling the recuperator, most cycle comparative studies employ simplified recuperator models where heat exchanger effectiveness or conductance is utilised to approximate heat transfer. These models do not consider the effect of recuperator size and geometry on heat transfer and pressure drop in detail. In this work, for a concentrated solar power (CSP) application, the performance and component size requirements of the cycles are evaluated parametrically for different cycle mass flow split ratios, pressure ratios, and ratio of pressure ratios across the compressors using detailed discretised one-dimensional (1D) recuperator models. Furthermore, the geometry of these models are optimised (by volume) for straight and zigzag channel printed circuit heat exchangers (PCHEs), widely accepted as the most suitable for this application. Finally, a high-level cost comparison is conducted. The results show that if appropriate pressure drop assumptions are made, a simplified model approach yields valid cycle level results when compared with the results obtained using detailed models which consider practical recuperator geometry. However, the pressures and temperatures within the recuperator may not be predicted to a sufficient level of accuracy. In addition to providing clarity regarding the interplay between key cycle process parameters and cycle performance, straight channel PCHEs provide better thermofluid performance than zigzag channel PCHEs. Furthermore, the RCICRH cycle requires larger turbomachinery and a marginally higher capital outlay for the power cycle, but offers superior thermal efficiencies and requires smaller heat exchangers. For sCO 2 -CSP applications employing dry cooling, this suggests that the RCICRH cycle requires a smaller solar field and cooling system, and may therefore offer increased revenue in adverse weather conditions where direct normal irradiance (DNI) is low and/or ambient temperatures are high. However, the PCRH cycle requires a smaller solar receiver system, a smaller thermal energy storage (TES) system, and smaller turbomachinery, the cost savings of which may outweigh the benefits of the RCICRH cycle.

Modeling of Combined Lead Fast Reactor and Concentrating Solar Power Supercritical Carbon Dioxide Cycles to Demonstrate Feasibility, Efficiency Gains, and Cost Reductions

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Small-scale concentrated solar power system with thermal energy storage: System-level modelling and techno-economic optimisation

The investigation of thermo-economic performance and conceptual design for the miniaturized lead-cooled fast reactor composing supercritical CO2 power cycle

Proposal and Assessment of a Novel Supercritical CO2 Brayton Cycle Integrated with LiBr Absorption Chiller for Concentrated Solar Power Applications

Thermo-Economic Analyses and Comparisons of Two S-CO2-Brayton-Cycle-Based Combined Power Cycles for Concentrated Solar Power Plants

Comparing the partial cooling and recompression cycles for a 50 MWe sCO 2 CSP plant using detailed recuperator models

Design and Performance Evaluation of an Innovative Solar-Nuclear Complementarity Power System Using the S–CO2 Brayton Cycle

Preliminary Conceptual Design and Thermo-Economic Analysis of a Combined Cooling, Heating and Power System Based on Supercritical Carbon Dioxide Cycle

Cost of Using Laser Powder Bed Fusion to Fabricate a Molten Salt-to-Supercritial Carbon Dioxide Heat Exchanger for Concentrating Solar Power

Supercritical CO2 Brayton Cycle Design for Small Modular Reactor with a Thermodynamic Analysis Solver

Investigation of Cascaded Shell and Tube Latent Heat Storage Systems for Solar Tower Power Plants

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application

Off-design operation of supercritical CO2 Brayton cycle arranged with single and multiple turbomachinery shafts for lead-cooled fast reactor

Performance enhancement of a solar-assisted pulverized coal power system by integrating a supercritical CO 2 cycle

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis

Process simulation and techno-economic analysis of CO 2 capture by coupling calcium looping with concentrated solar power in coal-fired power plant

Research of Supercritical Carbon Dioxide Thermal Power System Based on Lead-Cooled Fast Reactor

Dynamic Characteristics and Control Strategies of the Supercritical CO2 Brayton Cycle Tailored for the New Generation Concentrating Solar Power

Performance analysis of integrated Nuclear-Solar Energy system sharing same molten salt thermal energy storage

Indirect integration of thermochemical energy storage with the recompression supercritical CO2 Brayton cycle