Abstract:In the current research, strong strain-hardening capability in 1045 carbon steel was achieved by cold rolling and heat treatment of the lamellar structure. After 60% cold rolling, the proeutectoid ferrite and pearlite were severely elongated along the rolling direction. Cementite layers with brittle nature were fragmented under the action of stress and also by shear band formation during rolling. The lamellar heterogeneous microstructure of the heat-treated samples was formed by the proeutectoid ferrite as the soft domain and the pearlite as the hard domain. Increasing the heat treatment duration promoted the spheroidization transformation of cementite, and the spheroidization degree of cementite increased. With the increase in the time of heat treatment, the number of recrystallized grains is increased. Heat treatment led to weakening the deformation texture (⟨100⟩‖ND or θ fiber) and strengthening the recrystallization texture (⟨110⟩‖ND or ζ fiber). The heat-treated steels revealed an average microhardness value much higher than its macrohardness due to changes in the texture of ferrite grains. Heat treatment decreased the strength and hardness, and increased the ductility and toughness of steel compared to the cold-rolled sample owing to the annihilation of dislocations and the strengthening transition from strain hardening to grain refinement. The heat-treated samples exhibited a wider range of uniform plastic deformation and a larger strain hardening rate than the cold-rolled sample owing to the occurrence of the recovery of strain hardening rate phenomenon. The appropriate collocation of the fine spherical cementite and the soft/hard domains (with a large difference in mechanical properties) was beneficial to obtaining excellent strength-ductility balance in plain medium carbon steel. After heat treatment, the extent of ductile fracture considerably increased. With increasing the time of heat treatment from 1 to 3 h, the number of lamellar dimples decreased owing to the creation of more fine spherical cementite.

Subcritical Spheroidization of Medium-Carbon 50CrV4 Steel

The Spheroidizing Tendency and Spheroidization Mechanism of 75cr1 Steel

Behavior in Spheroidizing Annealing and Mechanical Properties of Medium Carbon Steel

Effect of Isothermal Annealing on Spheroidization of Carbides in GCr15 Steel

Effect of cyclic heat treatment on microstructure and mechanical properties of 50CrV4 steel

Recrystallization Annealing Soaking Time Effect on the Tribological Behavior of Cold Upsetted Low Carbon Steel

Effects of deformation and addition of aluminium on spheroidisation of high-carbon-bearing steel

Effect of Spheroidizing Annealing on the Carbide Precipitation Behavior of Cr-Mo-V-W Hot Work Die Steels

Spheroidization heat treatment and intercritical annealing of low carbon steel

On the spheroidized carbide dissolution and elemental partitioning in a high carbon bearing steel 100Cr6

Tailoring Strength and Ductility of a Cr-Containing High Carbon Steel by Cold-Working and Annealing

Effects of Annealing Process on Microstructure and Mechanical Properties of Hot Rolled Medium Carbon Steel Plate

Study on Spheroidizing Structure and Properties of Ultrahigh Carbon Steel

Effect of Spheroidizing Annealing Process on Microstructure and Properties of Quenching and Tempering 60Cr16MoMA Martensitic Stainless Steel

Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of medium carbon steel

Importance of cold rolling and tempering on the microstructure evolution, precipitation behavior and mechanical responses of 9Cr3Co3W1Cu ferritic/martensitic steel

Strong strain-hardening capability in plain carbon steel through cold rolling and heat treatment of lamellar structure

Co?evolution of Ferrite and Carbide During Annealing of Warm?rolled 40CrMo Medium and Thick Steel Plate

Effect of Cooling Rate on Microstructure Evolution and Mechanical Properties of SCM435 Steel

Spheroidizing Process of 2A12 Aluminum Alloy Grains During Heating Up and Semisolid Isothermal Treatment Stages

Acceleration of Spheroidization in Low‐Density Ultrafine Pearlitic Steel by κ‐Carbide