Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

Flow Mixing of Double Two-Inlet Y-Type Micro Channel with Optimal Layout of Obstacles

Mixing in T-shaped Micro-Channel Network

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Optimizing layout of obstacles for enhanced mixing in microchannels

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Passive Mixing and the Flow Characteristic of a H-Type Microchannel

An Enhanced One-Layer Passive Microfluidic Mixer with an Optimized Lateral Structure with the Dean Effect

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Fluid flow and mixing in a channel with dual bluff bodies

Research on the Mixing Characteristic in S-shaped Micro-channel

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Optimal Analysis Of The Hydraulic And Mixing Performances Of Symmetric T-Shaped Rectangular Microchannel Mixer

Effect of micro-channel geometry on fluid flow and mixing

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Flow analysis for efficient design of wavy structured microchannel mixing devices

Mixing enhancement of the passive microfluidic mixer with J-shaped baffles in the tee channel

Optimization of G1 Micromixer Structure in Two-Fluid Mixing Based on CFD and Response Surface Methodology