Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

Optimizing layout of obstacles for enhanced mixing in microchannels

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Flow Mixing of Double Two-Inlet Y-Type Micro Channel with Optimal Layout of Obstacles

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Effect of micro-channel geometry on fluid flow and mixing

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Mixing in microfluidic devices and enhancement methods

Experimental and Numerical Research on the Flow in Microchannel with Barriers

Boundary Condition Induced Passive Chaotic Mixing in Straight Microchannels

Flow analysis for efficient design of wavy structured microchannel mixing devices

Mixing enhancement using the aiding and opposing flow effects in curved micro channel

Numerical Analysis of Mixing Enhancement for Micro-Electroosmotic Flow

Computational investigation of flow field, mixing and reaction in a T-shaped microchannel

On the efficiency of convective mixing in a Y-shaped channel

Mixing Enhancement in a Straight Microchannel with Ultrasonically Activated Attached Bubbles

Convex Grooves in Staggered Herringbone Mixer Improve Mixing Efficiency of Laminar Flow in Microchannel

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Mass transfer intensification and mechanism analysis of gas–liquid two-phase flow in the microchannel embedding triangular obstacles