Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

Mixing enhancement using the aiding and opposing flow effects in curved micro channel

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Study on the mixing of fluid in curved microchannels with heterogeneous surface potentials

Impacts of channel wall twisting on the mixing enhancement of a novel spiral micromixer

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Numerical investigation of mixing improvement in a novel spiral microchannel with baffles

Mixing in microfluidic devices and enhancement methods

Flow analysis for efficient design of wavy structured microchannel mixing devices

Effect of micro-channel geometry on fluid flow and mixing

Numerical analysis of a microfluidic mixer and the effects of different cross-sections and various input angles on its mixing performance

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Enhanced mixing and flow reversal in a modulated microchannel

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Evaluation of the mixing performance of three passive micromixers

An Enhanced One-Layer Passive Microfluidic Mixer with an Optimized Lateral Structure with the Dean Effect

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Mixing enhancement of the passive microfluidic mixer with J-shaped baffles in the tee channel