Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

Computational investigation of flow field, mixing and reaction in a T-shaped microchannel

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Mixing in T-shaped Micro-Channel Network

Numerical and experimental studies of mixing characteristics in a T-junction microchannel using residence-time distribution

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Flow analysis for efficient design of wavy structured microchannel mixing devices

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Effect of micro-channel geometry on fluid flow and mixing

A Computational Study of Mixing Microchannel Flows

Computational Fluid Dynamics Study of Taylor Flow in Microreactors:Investigating the Effect of Surface Tension and Contact Angle on the Heatand Mass Transfer

Numerical simulation and experimental investigation of gas-liquid two-phase flow in a complex microchannel

Experimental and Numerical Research on the Flow in Microchannel with Barriers

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

Numerical Investigation of Near-Critical Fluid Convective Flow Mixing in Microchannels

A review on the analysis and experiment of fluid flow and mixing in micro-channels

Numerical modeling of sequential segmentation for enhancement of mixing inside microchannels

A Comparative Study of Two Numerical Methods Applied for 3D Liquid-Liquid Taylor Flow in a Microchannel

CFD Analysis of Flow Patterns and Micromixing Efficiency in a Y-Type Microchannel Reactor