Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

A review on the analysis and experiment of fluid flow and mixing in micro-channels

A review on fluid flow and mixing in microchannel and their design and manufacture for microfluidic applications

Microfluidic Mixing: A Review

Current methods for characterising mixing and flow in microchannels

A State-of-the-Art Review of Mixing in Microfluidic Mixers

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Mixing in microfluidic devices and enhancement methods

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

Engineering advancements in microfluidic systems for enhanced mixing at low Reynolds numbers

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

A comprehensive review on liquid–liquid two-phase flow in microchannel: flow pattern and mass transfer

Two-phase flow and mass transfer in microchannels: A review from local mechanism to global models

Flow analysis for efficient design of wavy structured microchannel mixing devices

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Special Issue on Multiphase Flows in Microfluidics: Fundamentals and Applications

Micromixing within microfluidic devices: Fundamentals, design, and fabrication

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Effect of micro-channel geometry on fluid flow and mixing

Evaluation of the mixing performance of three passive micromixers

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Experimental and Numerical Research on the Flow in Microchannel with Barriers