Abstract:LiNi0.5Mn1.5O4 cathode materials with a range of boron doping contents were successfully synthesized via an in situ solid-state method. The structures and grain morphologies were examined to elucidate the effect of boron doping on the electrochemical performance of LiNi0.5Mn1.5O4. Scanning electron microscopy images show that the particle sizes of boron-doped LiNi0.5-x/2B x Mn1.5-x/2O4 samples increase compared with those of pure LiNi0.5Mn1.5O4. Characterization results confirm that boron doping could create more Mn3+ ions and increase the Mn3+ ions contents in LiNi0.5-x/2B x Mn1.5-x/2O4 samples with increasing boron doping content. A greater number of Mn3+ ions could enhance the cationic disorder degree, thereby resulting in high electronic conductivities of LiNi0.5-x/2B x Mn1.5-x/2O4 samples. Charge-discharge tests reveal that improvements in the electrochemical performance are achieved in LiNi0.5-x/2B x Mn1.5-x/2O4 samples compared with that of pure LiNi0.5Mn1.5O4. The boron-doped LiNi0.495B0.01Mn1.495O4 (denoted as LNMO-B0.01) cathode exhibits an excellent cycling stability with a capacity retention of 83.3% after 500 cycles at 3 C. Moreover, it also displays an optimal rate capability with discharge capacities of 136.1, 135.7, 130.3, 126.2, 123.1, 114.5, 104.5, and 82.9 mA h g−1 at 0.2, 0.5, 1, 2, 3, 5, 7, and 10 C, respectively. The highest Li+ diffusion coefficient of LNMO-B0.01 determined from cyclic voltammetry tests indicates that an appropriate amount of boron doping could accelerate the Li+ diffusion in LNMO-B0.01. The lowest charge-transfer resistance obtained from the impedance spectra suggests that boron doping could promote kinetic charge transfer. As a result, this modification strategy can be utilized to enhance the electrochemical performance of LiNi0.5Mn1.5O4 material.

Preparation and Electrochemical Performance of Modified LiNi0.5Mn1.5O4Cathode Material for Lithium-ion Batteries

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Enhanced Electrochemical Performance of a Ti–Cr-Doped LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

High-rate Performance of LiNi0.5Mn1.45Al0.05O4 Cathode Material for Lithium-Ion Batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Surface modification of LiNi1/3Co1/3Mn1/3O2 with Cr2O3 for lithium ion batteries

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Co-precipitation synthesis and performance of multi-doped LiCr x Ni x Mn 2-2x O 4-z F z cathode materials for lithium ion batteries

Electrochemical Investigations of the Lini0.45m0.10mn1.45o4 (M = Fe, Co, Cr) 5v Cathode Materials for Lithium Ion Batteries

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li3PO4 as cathode material for Lithium-ion batteries

Na and Cl co-doping modified LiNi0.5Co0.2Mn0.3O2 as cathode for lithium-ion battery

Synthesis and electrochemical performance of Mo-doped LiNi0.5Mn1.5O4 cathode material

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

Synthesis and structural stability of Cr-doped Li2MnSiO4/C cathode materials by solid-state method

Electrochemical Performances of Layered LiNi0.7CO0.3–xMxO2 (m=al, Mn, Cr; X=0.05) Cathode Materials for Rechargeable Lithium Batteries

Enhancing electrochemical performance and structural stability of LiNi0.5Mn1.5O4 cathode material for rechargeable lithium-ion batteries by boron doping

Enhanced electrochemical performances of single crystal layered LiNi0.5Mn0.5O2 cathode through Na doping