Abstract:Catalytic combustion has been widely applied to remove the trace combustible pollutants. However, the earth-abundant and high-performance nanocatalysts are still the main research focus on promoting catalytic efficiency. Herein, the Cu and Mn mixed oxides supported on TiO2 nanoparticles with various Cu and Mn molar contents synthesized via the flame spray pyrolysis (FSP) technique are utilized in the catalytic oxidation of lean CO and CH4. Initially, the Cu-Mn/TiO2 nanocatalysts are composed of spherical structures with a diameter of about 20 nm, whose specific surface area is between 60 and 90 m(2)/g. The Cu element is more evenly distributed on the TiO2 surface than the Mn element, owing to the distinctly different ion radii. Both the copper and manganese cations could incorporate into the TiO2 lattice, which generates oxygen vacancies and enhances the diffusion of oxygen ions, causing the transformation of the antanse to rutile phase. When the molar content of the Cu-Mn increases to less than 30 mol %, the temperature of its reduction peak keeps decreasing due to the hydrogen spillover effect. Moreover, the catalytic performances of the Cu-Mn/TiO2 with 12 mol % loading (12CMT) are all optimal during the low-temperature and the high-temperature stages, which are superior to the FSP-made copper manganese or copper titanium oxides. This is attributed to the small crystal particles, highly dispersed active components of CuOx and MnOx, and the higher ratios of Cu1-/Cu and Mn4+-O-ads Lewis acid-base pairs. In addition, the strong interaction between Cu-Mn components and rutile phase support can tremendously promote the activity of catalytic combustion. Under the simulated flue gas, the catalytic properties of 12CMT decreases in comparison with those of CO and CH4 mixed gas due to the introduction of CO2. Ultimately, the Cu-Mn/TiO2 samples exhibit the outstanding water resistance, thanks to the hydrophobization of the catalyst surface.

Ordered mesoporous MCo2O4 (M = Cu, Zn and Ni) spinel catalysts with high catalytic performance for methane combustion

Mesoporous MCo2O4 (M = Cu, Mn and Ni) Spinels: Structural Replication, Characterization and Catalytic Application in CO Oxidation

One-Pot Pyrolytic Synthesis of Mesoporous Mco2o4(4.5) (M = Mn, Ni, Fe, Cu) Spinels and Its High Efficient Catalytic Properties for Co Oxidation at Low Temperature

Mesoporous Co–Mn Spinel Oxides As Efficient Catalysts for Low Temperature Propane Oxidation

Highly active urchin-like MCo2O4 (M = Co, Cu, Ni or Zn) spinel for toluene catalytic combustion

High-performance CoxM3-xAlOy (M Ni, Mn) catalysts derived from microwave-assisted synthesis of hydrotalcite precursors for methane catalytic combustion

Outstanding Stability and Highly Efficient Methane Oxidation Performance of Palladium-Embedded Ultrathin Mesoporous Co2MnO4 Spinel Catalyst

Cation-doping Tuned Flower-Like Co-based Spinel Structure for Methane Combustion: Structure-effect and Reaction Pathway Confirmation

High Efficient Mesoporous Co3o4 Nanocatalysts for Methane Combustion at Low Temperature

MoOx-Doped Ordered Mesoporous Ni/Al2O3 Catalyst for CO Methanation

Preparation of Mn-Doped Co3O4 Catalysts by an Eco-Friendly Solid-State Method for Catalytic Combustion of Low-Concentration Methane

Catalytic combustion of lean methane over MnCo2O4/SiC catalysts: Enhanced activity and sulfur resistance

Catalytic Performance of Manganese Cobalt Oxides on Methane Combustion at Low Temperature

Mesoporous Zirconia Supported CuO-Based Catalysts for Methane Catalytic Combustion

Low-temperature catalytic combustion of methane over modified MnOx-CeO2 mixed oxide catalysts

Cobalt–Magnesium Oxide Catalysts for Deep Oxidation of Hydrocarbons

Combustion Agent Mediated Flash Synthesis of Porous MCo2O4 (M = Zn, Ni, Cu and Fe) Via Self-Sustained Decomposition of Metal-Organic Complexes

Carbon Dioxide Reforming of Methane over Cobalt‐Nickel Bimetal‐Doped Ordered Mesoporous Alumina Catalysts with Advanced Catalytic Performances

Porous Cu-Mn-O Catalysts Fabricated by Spray Pyrolysis Method for Efficient CO Oxidation

One-Step Synthesis of Nanostructured Cu–Mn/TiO2 Via Flame Spray Pyrolysis: Application to Catalytic Combustion of CO and CH4

Facile synthesis of palladium incorporated NiCo2O4 spinel for low temperature methane combustion: Activate lattice oxygen to promote activity