Abstract:The ability to oxidize CO at relatively low temperature is barely satisfactory for pure SmMn2O5 (SMO) catalysts. While loading precious metals like platinum nanoclusters on mullite SMO is an effective approach to enhance its catalytic performance, the high cost of noble metals has limited its large scale application. In this work, we systematically study an alternative approach to composite catalyst formation by loading non-precious metal oxides MOx (M = Mn, Fe, Co, Ni, Cu) onto SMO mullite for CO oxidation. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) and high-resolution transmission electron microscopy (HRTEM) analyses show that composite catalysts are successfully formed by loading MOx nanoparticles at a content of approximate to 0.75 wt% through the deposition precipitation (DP) method. Except for FeOx, MOx loaded samples in general exhibit much higher reaction rates of CO oxidation than bare SMO especially at the temperature range below 100 degrees C. The promoted activity for MOx/SMO composites can be attributed to the improved reducibility of adsorbed oxygen (O-ads) and the increased oxidation state of Mn cations at the interface. Such behavior accelerates the decomposition of carbonates, as indicated by the H-2 temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy results. We demonstrate that the best catalytic performance of the CuOx/SMO composite also stems from the additional CO adsorption on the CuOx sites. The work presented herein provides a method to enhance the CO oxidation performance of SMO and helps in understanding the oxidation reaction mechanism involving mullites with loaded transition metal oxides (TMOs).

Investigation of catalytic methane oxidation over Ag/Co2MOx (M = Co, Ni, Cu) catalysts with varying interfacial electron transfer

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

A judicious hetero-dopants injection and abstraction of Co3O4 catalyst for efficient methane oxidation

A facial strategy to synthesize Pd/Co3O4 nanosheets with enhanced performance for methane catalytic oxidation

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation

Silver–Cobalt Oxides Derived from Silver Nanoparticles Deposited on Layered Double Hydroxides for Methane Combustion

Screening Transition Metals (mn, Fe, Co, and Cu) Promoted Ni-Based CO2 Methanation Bimetal Catalysts with Advanced Low-Temperature Activities

Study on Methane Conversion over WOx/Co-Fe-Mo-O Catalysts

Synthesis, Characterization, and Catalytic Evaluation of Co 3 O 4 /Γ-Al 2 O 3 As Methane Combustion Catalysts: Significance of Co Species and the Redox Cycle

Enhancement of hollow Ni/CeO2-Co3O4 for CO2 methanation: From CO2 adsorption and activation by synergistic effects

CO oxidation and oxygen-assisted CO adsorption/desorption on Ag/MnOx catalysts

Nickel Oxide As an Effective Catalyst for Catalytic Combustion of Methane

Ag-modified SmMn2O5 Catalysts for CO and C3H8 Oxidation

Preferential Oxidation of CO and Its Subsequent Methanation in H2-rich Gas over CuO–NiO/CeO2 Catalysts

CO Oxidation over MOx (M = Mn, Fe, Co, Ni, Cu) Supported on SmMn2O5 Composite Catalysts

Study of Partial Oxidation and CO2 Reforming of Methane on Co Based Catalysts

Atomically dispersed MoNi alloy catalyst for partial oxidation of methane

Tuning reverse water gas shift and methanation reactions during CO2 reduction on Ni catalysts via surface modification by MoOx

Advancing catalytic oxidation of lean methane over cobalt-manganese oxide via a phase-engineered amorphous/crystalline interface

Construction of Co/Mn-based nanowires with adjustable surface state for boosting lean methane catalytic oxidation

Effect of Cu–Mo Activities on the Ni–Cu–Mo/Al2O3 Catalyst for CO2 Reforming of Methane