Abstract:As a precursor material, CoyCu3−y-MOF-74 has been synthesized by using a cost-effective and environmentally friendly mechanochemical method. It had a uniform nano-morphology and a controllable stoichiometric composition. By calcinating the CoyCu3−y-MOF-74 material, a bimetallic Co-Cu oxide catalytic material, with the formula M-CoyCu3−yOx, could, thereafter, be prepared. It was later on used for catalytic oxidation of toluene. The effect of calcination temperature and Co/Cu molar ratio on the redox properties, catalytic activity, and structural properties of the catalyst, were also systematically studied. The M-Co2Cu1Ox catalyst showed a complete toluene conversion of 1000 ppm toluene at 225 ℃ and with a under weight hour space velocity of 30,000 ml/ (g h). The corresponding conversion temperature for 50% and 90% of the original amount of M-Co2Cu1Ox (i.e., T50 and T90) were 202 and 220 ℃, respectively. X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electron paramagnetic resonance (EPR) results also showed a high density of oxygen vacancies in M-Co2Cu1Ox. Also, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments indicated that benzaldehyde and benzoic acid were the main intermediates formed during the catalytic oxidation of toluene. In addition, the M-Co2Cu1Ox catalyst did also show an excellent durability and good water resistance by exposing it to a 5% water vapor for 24 h. Thus, the green and facile mechanical synthesis of the MOF-74 precursor has been proven to be very beneficial for the design and synthesis of a mixed metal oxide catalyst with a high toluene catalytic oxidation efficiency.

Highly active urchin-like MCo2O4 (M = Co, Cu, Ni or Zn) spinel for toluene catalytic combustion

Ordered mesoporous MCo2O4 (M = Cu, Zn and Ni) spinel catalysts with high catalytic performance for methane combustion

A bimetallic MOF-derived MnCo spinel oxide catalyst to enhance toluene catalytic degradation

Pd-Co Based Spinel Oxides Derived from Pd Nanoparticles Immobilized on Layered Double Hydroxides for Toluene Combustion

Low-temperature Gas-Phase Toluene Catalytic Combustion over Modified CoCr2O4 Spinel Catalysts: Effect of Co/Cr Content and Calcination Temperature

Highly Stable MOFs-Derived Cu–Co Composite Metal Oxides for Catalytic Oxidation of Toluene

Catalytic oxidation of toluene over Co-Cu bimetallic oxides derived from CoyCu3-y-MOF-74

Catalytic total oxidation of toluene over carbon-supported CuCo oxide catalysts derived from Cu-based metal organic framework

Catalytic total oxidation of toluene over carbon-supported Cu-Co oxide catalysts derived from Cu-based metal organic framework

Bimetal oxide CuO/Co3O4 derived from Cu ions partly-substituted framework of ZIF-67 for toluene catalytic oxidation

Mn–Co Oxide Decorated on Cu Nanowires As Efficient Catalysts for Catalytic Oxidation of Toluene

Spinel Co3O4 oxides-support synergistic effect on catalytic oxidation of toluene

Template-free Scalable Synthesis of Flower-like Co3-x Mn x O4 Spinel Catalysts for Toluene Oxidation

Controllable Synthesis of Pd/CuxCo3-xOn Interfaces for Highly Efficient Catalytic Combustion of Toluene

Enhancement effect of Mn doping on Co3O4 derived from Co-MOF for toluene catalytic oxidation

Toluene Catalytic Combustion over Copper Modified Mn0.5Ce0.5 Ox Solid Solution Sponge-Like Structures

Toluene combustion over Co3O4-CNTs/PSSF catalysts and investigation of the effects of acid treatment on catalytic activity

Comparison of Different Metal Doping Effects on Co3O4 Catalysts for the Total Oxidation of Toluene and Propane

Metal organic framework template method for the preparation of bimetallic oxide Cu n CoO x catalysts for the catalytic oxidation of volatile organic compounds

Insight into the Better collaboration of NiO and MnOx in NiMn2O4 Spinel for Enhanced the Catalytic Oxidation Performance of Toluene

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation