Abstract:Pomelo peel, as a by-product of pomelo consumption, is rich in various fiber and functional compounds. The utilization of the valuable components found in pomelo peel may mitigate environmental concerns. In this study, pomelo peel rich in lignin and oxygen-containing functional groups was used to prepare pomelo peel biochar (PPB) via temperature-programmed pyrolysis at different temperatures (800 ℃ and 1000 ℃). Their structures were investigated by N2 adsorption-desorption isotherms and BJH pore size distribution. The results showed that PPB1000 (pomelo peel biochar prepared at 1000 ℃) had a higher specific surface area (749.9 m2/g), larger pore volume (0.42 cm3/g), more concentrated pore size distribution (2-3 nm), and better adsorption performance than commercial activated carbon. PPB1000 exhibited excellent capability to capture benzenes (BTEX, including benzene (B), toluene (T), ethylbenzene (E), and xylene (X)) through hydrogen bonds, π-π, and electrostatic interactions. Additionally, their honeycomb porous structure could provide additional adsorption sites and material transport paths. PPB1000 was coated on iron wire using the sol-gel method to prepare chemically and mechanically stable solid phase microextraction (SPME) fibers. By combining PPB1000-based SPME analysis with gas chromatography-flame ionization detection (GC-FID), an effective method was developed for the extraction and determination of BTEX. The optimized method had low LODs (0.004-0.032 μg/L), wide linear range (1-100 μg/L), and good linear relationship (determination coefficients, r2≥0.9919). The RSDs of the intra-batch (n=6) and inter-batch (n=5) precisions were 1.04%-6.56% and 1.03%-12.42%, respectively. The method validation results showed that PPB1000 had good stability. Compared with the commercial reagent polydimethylsiloxane (7 μm), PPB1000 had a higher extraction efficiency. When applied to the analysis of BTEX in natural water samples, trace levels of ethylbenzene (4.80 μg/L), o-xylene (3. 00 μg/L), and m-xylene and p-xylene (2.46 μg/L) were detected. Recovery tests were performed to validate the reliability of the method, and recoveries were between 75.7% and 117.6%. This effective pretreatment process combined with GC-FID could realize the rapid detection of BTEX and is promising for the analysis of BTEX in complex matrixes in the future.

Carbon nanospheres covalently modified with polydimethylsiloxane on a porous sol–gel support for use in headspace solid-phase fiber microextraction of BTEX

Evaluation of the solid-phase microextraction fiber coated with single walled carbon nanotubes for the determination of benzene, toluene, ethylbenzene, xylenes in aqueous samples.

PDMS-coated Γcd-Mof Solid-Phase Microextraction Fiber for BTEX Analysis with Boosted Performances.

Preparation of a Carbon-Coated SPME Fiber and Application to the Analysis of BTEX and Halocarbons in Water

Investigation of a Novel Activated Carbon Coating Fiber Used for Solid Phase Micro-Extraction

Incorporation of Carbon Nanotubes into Graphene for Highly Efficient Solid-Phase Microextraction of Benzene Homologues

Monodisperse Microporous Carbon Nanospheres: an Efficient and Stable Solid Phase Microextraction Coating Material

Hollow carbon nanobubbles-coated solid-phase microextraction fibers for the sensitive detection of organic pollutants

Preparation and Characterization of Porous Carbon Material-Coated Solid-Phase Microextraction Metal Fibers.

Ordered mesoporous hairbrush-like nanocarbon assembled microfibers for solid-phase microextraction of benzene series in oilfield sewage

Preparation and characterization of vinyl-functionalized mesoporous organosilica-coated solid-phase microextraction fiber

Determination of benzene, toluene, ethylbenzene, and p-xylene with headspace-hollow fiber solid-phase microextraction-gas chromatography in wastewater and Buxus leaves, employing a chemometric approach

A solid-phase microextraction fiber with carbon nanoparticles as sorbent material prepared by a simple flame-based preparation process

[Solid phase microextraction of benzenes in river water by pomelo peel biochar]

Field analysis of benzene, toluene, ethylbenzene and xylene in water by portable gas chromatography-microflame ionization detector combined with headspace solid-phase microextraction.

Carbon nanotube-coated solid-phase microextraction metal fiber based on sol–gel technique

Preparation and Characterization of Metal-Organic Framework MIL-101(Cr)-coated Solid-Phase Microextraction Fiber

Nanoparticle-Incorporated PDMS Film as an Improved Performance SPME Fiber for Analysis of Volatile Components of Eucalyptus Leaf

Disposable ionic liquid coating for headspace solid-phase microextraction of benzene, toluene, ethylbenzene, and xylenes in paints followed by gas chromatography-flame ionization detection.

A novel sol-gel-based amino-functionalized fiber for headspace solid-phase microextraction of phenol and chlorophenols from environmental samples

Preparation Of Solid-Phase Microextraction Fiber Coated With Single-Walled Carbon Nanotubes By Electrophoretic Deposition And Its Application In Extracting Phenols From Aqueous Samples