Abstract:Pomelo peel, as a by-product of pomelo consumption, is rich in various fiber and functional compounds. The utilization of the valuable components found in pomelo peel may mitigate environmental concerns. In this study, pomelo peel rich in lignin and oxygen-containing functional groups was used to prepare pomelo peel biochar (PPB) via temperature-programmed pyrolysis at different temperatures (800 ℃ and 1000 ℃). Their structures were investigated by N2 adsorption-desorption isotherms and BJH pore size distribution. The results showed that PPB1000 (pomelo peel biochar prepared at 1000 ℃) had a higher specific surface area (749.9 m2/g), larger pore volume (0.42 cm3/g), more concentrated pore size distribution (2-3 nm), and better adsorption performance than commercial activated carbon. PPB1000 exhibited excellent capability to capture benzenes (BTEX, including benzene (B), toluene (T), ethylbenzene (E), and xylene (X)) through hydrogen bonds, π-π, and electrostatic interactions. Additionally, their honeycomb porous structure could provide additional adsorption sites and material transport paths. PPB1000 was coated on iron wire using the sol-gel method to prepare chemically and mechanically stable solid phase microextraction (SPME) fibers. By combining PPB1000-based SPME analysis with gas chromatography-flame ionization detection (GC-FID), an effective method was developed for the extraction and determination of BTEX. The optimized method had low LODs (0.004-0.032 μg/L), wide linear range (1-100 μg/L), and good linear relationship (determination coefficients, r2≥0.9919). The RSDs of the intra-batch (n=6) and inter-batch (n=5) precisions were 1.04%-6.56% and 1.03%-12.42%, respectively. The method validation results showed that PPB1000 had good stability. Compared with the commercial reagent polydimethylsiloxane (7 μm), PPB1000 had a higher extraction efficiency. When applied to the analysis of BTEX in natural water samples, trace levels of ethylbenzene (4.80 μg/L), o-xylene (3. 00 μg/L), and m-xylene and p-xylene (2.46 μg/L) were detected. Recovery tests were performed to validate the reliability of the method, and recoveries were between 75.7% and 117.6%. This effective pretreatment process combined with GC-FID could realize the rapid detection of BTEX and is promising for the analysis of BTEX in complex matrixes in the future.

Determination of benzene, toluene, ethylbenzene, and p-xylene with headspace-hollow fiber solid-phase microextraction-gas chromatography in wastewater and Buxus leaves, employing a chemometric approach

Field analysis of benzene, toluene, ethylbenzene and xylene in water by portable gas chromatography-microflame ionization detector combined with headspace solid-phase microextraction.

Carbon nanospheres covalently modified with polydimethylsiloxane on a porous sol–gel support for use in headspace solid-phase fiber microextraction of BTEX

Evaluating BTEX in vehicle exhaust gas: A fast and efficient approach using SPME and GC-BID

Refrigerated sorptive extraction: determination of BTEX in water samples

[Solid phase microextraction of benzenes in river water by pomelo peel biochar]

MOF-801 based solid phase microextraction fiber for the monitoring of indoor BTEX pollution

Solvent-assisted Vacuum Desorption Coupled with Gas Chromatography-Tandem Mass Spectrometry for Rapid Determination of Polycyclic Aromatic Hydrocarbons in Soil Samples.

Determination of BTEX Compounds in Marine Shallow Sediments by Micellar Electrokinetic Capillary Chromatography

Simultaneous Determination of Mtbe and Btex in the Groundwater of Gas Station by Head-Space-Gc

Heating-, Cooling- and Vacuum-Assisted Solid-Phase Microextraction (HCV-SPME) for Efficient Sampling of Environmental Pollutants in Complex Matrices

Optimization of headspace solid phase microextraction based on nano-structured ZnO combined with gas chromatography-mass spectrometry for preconcentration and determination of ultra-traces of chlorobenzenes in environmental samples

Determination of Decabrominated Diphenyl Ether in Soils by Soxhlet Extraction and High Performance Liquid Chromatography

Determination of Low Concentration Benzene Compounds in Water by Headspace Trap-Gas Chromatography

Polyaniline-Based Fiber for Headspace Solid-Phase Microextraction of Substituted Benzenes Determination in Aqueous Samples

Determination of Biodegradation Products from Benzene,Toluene, Ethylbenzene and Xylenes in Seawater by Purge and Trap Gas Chromatography

Rapid determination of volatile benzene derivatives and chlorobenzenes in goat's milk by HS-SPME-GC-MS/MS

Hybrid Separation and Detection Device for Analysis of Benzene, Toluene, Ethylbenzene, and Xylenes in Complex Samples

Headspace Solid-Phase Microextraction Coupled to Miniaturized Microplasma Optical Emission Spectrometry for Detection of Mercury and Lead.

Simultaneous Determination of Benzene and Toluene in Pesticide Emulsifiable Concentrate by Headspace GC-MS

Development and optimization of an HPLC–DAD method for quantification of six petroleum hydrocarbon compounds in aqueous samples