Abstract:The heat partition coefficient between two finite thickness contact discs during long-time sliding is studied with a coupled finite element method. Results show that the heat partition coefficient varies from its initial value to another steady state value rapidly instead of being a constant all the time. An analytical solution of the temperature field under invariant heat flux input is deduced, which tells that there exists a unique critical thickness ratio between the contact discs that keeps the heat partition coefficient a constant. An equivalent method for single-material contact bodies is proposed that is capable of calculating the steady state heat partition coefficient for any thickness ratio. It reveals that the steady state heat partition coefficient only has relationship with the mass density and the heat capacity of the materials and the thickness ratio. Based on this method, a two-step material equivalent method is further proposed for the contact discs that have friction linings on them. The solution shows that the steady state heat partition coefficient in this situation is also only determined by the material properties and the layer thicknesses. A test bench of multi-disc clutch is set up and a series of sliding experiments are conducted to validate the proposed equivalent methods and solutions of steady state heat partition coefficient. The measured experimental temperature variations show that the temperature level of the separator disc in the clutch is overestimated with the constant heat partition coefficient of semi-infinite model, while it is close to those calculated results with steady state heat partition coefficient. Therefore, the temperature fields of the contact discs during long-time sliding with constant speed can be figured out efficiently using the steady state heat partition coefficient with only small error, and these equivalent methods benefit the multi-disc clutch design and temperature estimation in practical applications.

Temperature field analysis of pin-on-disk sliding friction test

Heat Analysis of Sliding Abrasive Particle Micro Contact Process by Finite Element Method

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Experimental and Finite Element Analysis of Frictional Heat Distribution during Sliding Friction

Simulation of the Friction Temperature Field for Disc Brake

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Application of Pitch Arc Moving Heat Source Model in Grinding Temperature Field of Disk Workpiece

Transient temperature characteristics of friction clutch disc considering thermal contact conductance under sliding conditions

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Analytical Model and Material Equivalent Methods for Steady State Heat Partition Coefficient Between Two Contact Discs in Multi-Disc Clutch

Pin-on-Disc Testing of Low-Metallic Friction Material Sliding Against HVOF Coated Cast Iron: Modelling of the Contact Temperature Evolution

Calculation of Temperature Field in Dry Sliding Contact at Different Speeds

Wear and Contact Temperature Evolution in Pin-on-Disc Tribotesting of Low-Metallic Friction Material Sliding Against Pearlitic Cast Iron

Influence upon temperature field distribution with straight grooves parameters of clutch friction disk

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Modeling of contact temperatures and their influence on the tribological performance of PEEK and PTFE in a dual-pin-on-disk tribometer

Temperature Analysis of Wet Clutch' Friction Pair Considering Axial Pressure Attenuation Effect

Calculation of Temperature Fields of Bodies in Sliding Contact Without Lubrication

A temperature field model based on energy flow analysis of wet clutch sliding interface

A thermal model in frictional contacts

Numerical and experimental study of the relationship between friction area and temperature of aluminium-based brake disc