Abstract:Purpose This paper aims to develop a resonant accelerometer for structure optimization. The dynamic analysis of the resonator for resonant accelerometer are investigated. Design/methodology/approach First, the working principle and mechanical model of the resonator are introduced. Moreover, dynamic analysis of the resonator is used for the purpose of investigating the dynamic characteristics of the resonant accelerometer. Finally, to verify the feasibility of the proposed dynamic analysis method, resonant accelerometer 1g static tumbling experiments of resonant accelerometer are built. Findings It can be seen from the natural frequency and the resonator mode that only when the resonator root stiffness is much greater than the resonant beam stiffness, there will be appear corresponding interference mode, therefore,the resonator root stiffness is avoid too large in design. The stability analysis result of resonant beam under axial force show that the resonant beam parameters should be maintained a constant. At the same time, it is concluded from the vibration mode analysis for resonant beam that the influence of the beam thickness and beam errors on the first and second order modes is great. On the other hand, it is concluded from the test result that the designed resonant accelerometer sensitivity is 98 Hz/g, which shows that the dynamic analysis method is feasible. Practical implications The research may be significant in the field of resonant sensors, supporting a variety of practical applications such as phone and game. Originality/value This paper seeks to establish a foundation for designing and optimizing resonant accelerometer structure. To this end, the dynamic analytical method of the resonator for resonant accelerometer was discussed. The results of this research have proved that the dynamic analysis based on a resonator is an effective approach and instructional in practical resonant sensor design.

Theoretical Analysis of an Optical Accelerometer Based on Resonant Optical Tunneling Effect

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Research On Accelerometer Based On Multi-Mode Interference

Design and Modification of a High-Resolution Optical Interferometer Accelerometer

Simulation of an Optical Accelerometer Based on Integrated Optical Ring Resonator.

The Design, Modeling and Experimental Investigation of a Micro-G Microoptoelectromechanical Accelerometer with an Optical Tunneling Measuring Transducer

High Sensitivity Optical MEMS Accelerometer Based on a Metal Fabry–Pérot Microcavities Wavelength Modulation System

An Optical Measuring Transducer for a Micro-Opto-Electro-Mechanical Micro-g Accelerometer Based on the Optical Tunneling Effect

Experimental characterization of a mode-localized acceleration sensor integrating electrostatically coupled resonators

Optimal design of high sensitive integrated optical accelerometer

Design the Structure of High-g Optical Microcavity Accelerometer

Broadband Optomechanical Accelerometer Reaching the Thermomechanical Limit Based on Suspended Si3N4 Membrane Resonator

A Novel Optical Accelerometer Based on Slant-Ended Fiber

Dynamic Analysis of the Resonator for Resonant Accelerometer

A New High-Precision Micro-Accelerometer Based on Optomechanical System