Abstract:To provide good light sources of narrow linewidth for coherent optical communication systems we have proposed a new type of external cavity semiconductor laser with multisegment cavity structure.1 Its advantages are: (1) stable single longitudinal mode operation with high side-mode suppression ratio is easily obtained; (2) two-branch output beams standing in direction can be used. In this paper we report a practical device with multisegment cavity configuration, which basically consists of a 1.5-μm antireflection coated laser diode (LD) coupled by a graded-index (GRIN) lens to a thin Fabry-Perot etalon. The etalon is fixed on a piezoelectric transducer (PZT) and its angle of inclination can be adjusted by three fine screws for laser wavelength tuning and for optimization of alignment. The facet reflectivities of the LD, GRIN lens, and F.P. etalon are matched for achieving good single longitudinal mode oscillation. Analyses and experiments indicate that the frequency instability originates mainly from the fluctuation of the environmental temperature and mechanical disturbances in external cavity lasers.2 To reduce these effects all components are stuck on a microcrystal glass plate with low expansion coefficient and their interthermal expansions are compensated, i.e., 2αi,Li ≈ 0, where αi, and Li, are the thermal expansion coefficient and lengths of each component, respectively. The LD temperature is controlled within 0.1°C using a small Peltier cooler. All the components are put in a copper box. The device size is 32 × 26 × 65 mm3 and the actual cavity length is 2-4 cm.

Hybrid Laser Cavity Design for Improved Photon Lifetime and Performance

Angular characters of enhanced resonance in an active microcavity embedded in dielectric Bragg reflectors

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

Analysis and Design of Combined Distributed-Feedback/fabry-perot Structures for Surface-Emitting Semiconductor Lasers

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

A Highly Efficient Hybrid Fiber Optic Laser Using a Cesium Atom Vapor Cell as an Optical Gain Medium

Wavelength Tunable Cavity Mirror for Silicon Micro-Ring-Based Hybrid Integrated Lasers

Phase-matched Combined Distributed-Feedback/fabry-pérot Structure for Semiconductor Lasers

An Improved Surface-Plasmonic Nanobeam Cavity for Higher Q and Smaller V

A Method for Improving Reflection Tolerance of Laser Source in Hybrid Photonic Packaged Micro-System

High Efficiency Frequency Doubling with a Passive Enhancement Cavity

Hybrid Integrated Modulation Bandwidth Enhanced Laser Based on Self-Injection Locking to an External High-Q Microring Reflector

Hybrid Microcavity Lasers: Principle, Design, and Practical Application

Intracavity Deformable Mirror for Beam Quality Improvement and Power Enhancement of a Passively Q-switched Laser

Hybrid output mirror for optically pumped far infrared lasers

Hybrid integrated Si3N4 external cavity laser with high power and narrow linewidth

Practical Multisegment Composite-Cavity Semiconductor Lasers

Robust hybrid laser linewidth reduction using Si<sub>3</sub>N<sub>4</sub>-based subwavelength hole defect assisted microring reflector

Enhanced beam quality of high-energy lasers utilizing fused silica as an all-solid-state SBS-PCM

A new laser scheme for energy scaling with a composite six-mirror cavity

LD pumped laser MOPA system with a phase conjugating mirror of a fused silicon rod