Abstract:To provide good light sources of narrow linewidth for coherent optical communication systems we have proposed a new type of external cavity semiconductor laser with multisegment cavity structure.1 Its advantages are: (1) stable single longitudinal mode operation with high side-mode suppression ratio is easily obtained; (2) two-branch output beams standing in direction can be used. In this paper we report a practical device with multisegment cavity configuration, which basically consists of a 1.5-μm antireflection coated laser diode (LD) coupled by a graded-index (GRIN) lens to a thin Fabry-Perot etalon. The etalon is fixed on a piezoelectric transducer (PZT) and its angle of inclination can be adjusted by three fine screws for laser wavelength tuning and for optimization of alignment. The facet reflectivities of the LD, GRIN lens, and F.P. etalon are matched for achieving good single longitudinal mode oscillation. Analyses and experiments indicate that the frequency instability originates mainly from the fluctuation of the environmental temperature and mechanical disturbances in external cavity lasers.2 To reduce these effects all components are stuck on a microcrystal glass plate with low expansion coefficient and their interthermal expansions are compensated, i.e., 2αi,Li ≈ 0, where αi, and Li, are the thermal expansion coefficient and lengths of each component, respectively. The LD temperature is controlled within 0.1°C using a small Peltier cooler. All the components are put in a copper box. The device size is 32 × 26 × 65 mm3 and the actual cavity length is 2-4 cm.

A Highly Efficient Hybrid Fiber Optic Laser Using a Cesium Atom Vapor Cell as an Optical Gain Medium

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

A kinetic model for optically pumped cesium vapor laser

Modeling of a diode transverse-pumped cesium vapor laser

Modeling of a Diode Four-Side Pumped Cesium Vapor Laser Amplifier with Flowing Medium

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Fabrication of Optical Cavities with Femtosecond Laser Pulses

High Efficiency Frequency Doubling with a Passive Enhancement Cavity

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

Hybrid Laser Cavity Design for Improved Photon Lifetime and Performance

Compact hybrid laser based on semiconductor nanowires and a silica biconical fiber

A Cavityless Laser Using Cesium Cell with 459 Nm Laser Pumping

Compact Vapor Cell Cesium Clock Based on Continuous Wave Optical Pumping

Optimally Gain-Flattened and Dispersion-Managed C + L-band Hybrid Amplifier Using a Single-Wavelength Pump Laser

Tunable, Single-Wavelength Fiber Laser Based on Hybrid Microcavity Functionalized by Atomic Layer Deposition

Wireless optical power transmission based on the off-axis VECSEL of long resonator

Highly-efficient, diffraction-limited laser emission from a Vertical External Cavity Surface-emitting Organic Laser

Practical Multisegment Composite-Cavity Semiconductor Lasers

Efficient Hybrid Integration of Long-Wavelength VCSELs on Silicon Photonic Circuits

A High-Power, High-Efficiency Hybrid Silicon-Based Erbium Silicate-Silicon Nitride Waveguide Laser

Cavity Optofluidics: Raman Laser Made of a Fiber Coupled nano-Liter Droplet