Abstract:The bidirectional output fiber laser can achieve two laser outputs from a single resonant cavity, which can reduce the volume and cost of high-power fiber laser systems and has good application prospects in the industry. In this work, we demonstrated a bidirectional output fiber laser oscillator structure, and a total output power of 8 kW at the 2 ports × 4 kW level was achieved experimentally for the first time. In order to suppress stimulated Raman scattering (SRS) and transverse mode instability (TMI), the double cladding ytterbium-doped fiber with a core/cladding diameter of 30/400 μm, a pair of matched output coupler fiber Bragg gratings (OCFBG) with a 3 dB bandwidth of 2 nm, and the pump source with wavelength-stabilized 981 nm laser diodes (LDs) were employed. The effect of the coiling method and diameter of the active fiber on the optical-to-optical (O-O) efficiency and TMI threshold were studied intensively. The comparison of laser performance with a unidirectional output oscillator was further exploited, and results indicated that the bidirectional output fiber laser oscillator possessed a higher O-O efficiency and TMI threshold. By optimizing the fiber coiling diameter and coiling method, we finally achieved a total laser output power of 8169 W (3769 W at end A and 4400 W at end B), with an efficiency of 74.6% and beam quality of M 2 A ∼ 2.13, M 2 B ∼ 2.36, while the total output power achieved by unidirectional output structure was only 5805 W with signs of TMI. To the best of our knowledge, it is the highest output power of the bidirectional output fiber laser.

A new laser scheme for energy scaling with a composite six-mirror cavity

Intracavity Beam Addition for Energy Scaling with a Six-Mirror Cavity

Coherent Combining of Two Pulsed Solid State Lasers

Experimental Investigation of Laser Power Addition with Composite Four-Mirror Cavity

Analysis and Design of Combined Distributed-Feedback/fabry-perot Structures for Surface-Emitting Semiconductor Lasers

New beam CO2 laser

High Brightness Diode Laser Based on V-Shaped External Cavity and Beam-Waist Splitting Polarization Combining

Scalable structure of coherent polarization beam combining based on tapered diode laser amplifiers

Concept for power scaling by harmonic beam coaxial combination in an intra-cavity frequency doubling laser

Far field output distribution features for spectral beam combining of diode laser array stack in an external cavity

Hybrid Laser Cavity Design for Improved Photon Lifetime and Performance

Single Fiber Coupling of Multi-Linear-Array-Diode-Lasers

Practical Multisegment Composite-Cavity Semiconductor Lasers

Intracavity Power Addition with a Close-Ended Composite Four-Mirror Cavity

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Intracavity Deformable Mirror for Beam Quality Improvement and Power Enhancement of a Passively Q-switched Laser

Single-lobed near diffraction-limited beam from 1W laser diode array with an external cavity

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

Coherent Beam Combination of Ultrafast Fiber Lasers

Diode-pumped at Two Points Two-mirror Ring Laser with Output on Single Point

Cr:Yag Passively Q-Switched Single-Frequency Nd:Yvo4 Ring Cavity Laser