Abstract:Liquid foam exhibits surprisingly high viscosity, higher than each of its phases. This dissipation enhancement has been rationalized by invoking either a geometrical confinement of the shear in the liquid phase, or the influence of the interface viscosity. However, a precise localization of the dissipation, and its mechanism, at the bubble scale is still lacking. To this aim, we simultaneously monitored the evolution of the local flow velocity, film thickness and surface tension of a five films assembly, induced by different controlled deformations. These measurements allow us to build local constitutive relations for this foam elementary brick. We first show that, for our millimetric foam films, the main part of the film has a purely elastic, reversible behavior, thus ruling out the interface viscosity to explain the observed dissipation. We then highlight a generic frustration at the menisci, controlling the interface transfer between neighbor films and resulting in the localization of a bulk shear flow close to the menisci. A model accounting for surfactant transport in these small sheared regions is developed. It is in good agreement with the experiment, and demonstrate that most of the dissipation is localized in these domains. The length of these sheared regions, determined by the physico-chemical properties of the solution, sets a transition between a large bubble regime in which the films are mainly stretched and compressed, and a small bubble regime in which they are sheared. Finally, we discuss the parameter range where a model of foam viscosity could be built on the basis of these local results.

On the Question of the Sign of Size Effects in the Elastic Behavior of Foams

Experimental and Micromechanical Study of Size Effects in the Constrained Deformation of Metallic Foams

Large Stiffness Thermoformed Open Cell Foams with Auxeticity

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Size effects in the constrained deformation of metallic foams

Mechanical Properties of Foam Aluminum with Different Sizes

Cell-size effect on mechanical properties of aluminum foams

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

Effect of cell structure on elastoplastic behavior of closed-cell foam material

Strengthening of foamed composite materials

Shear modulus and yield stress of foams: contribution of interfacial elasticity

Effect of Cell Structure on the Uniaxial Compression Properties of Closed-Cell Foam Materials

Effect of the Large Cells on the Fatigue Properties of Closed-Cell Aluminum Alloy Foam

Size effect on compressive strength of foamed concrete: Experimental and numerical studies

Effect of Cell Diameter Variations on the Mechanical Behavior of Aluminum Foams: Experiments and Modeling

Micromorphic FE$^2$ Simulation of Plastic Deformations of Foam Structures

Investigation of the Damage Phenomenology with Dependence on the Macroporosity and Microporosity of Porous Freeze Foams

Local origin of the visco-elasticity of a millimetric elementary foam

Numerical Analysis of Elastoplastic Behavior of Foams with Ellipsoidal Pores

Modeling and Limits of Strength of Nanoporous Foams